User Manual - TRS-RenTelco

Setting Up Measurements
There are three ways to change the average:
Turn the top knob on the front panel to change the number of averages.
When it is set to the correct number, click outside the box to enter the
change.
Click the keypad button to the left of the number entry box. Use the pop-up
keypad to enter a setting for the number of averages to perform.
Using the keyboard to directly input the desired value.
The next time the H Timing measurement is run, it will run with the newly
entered numbers.
Setting Up the Linearity Measurement
Option VGA
To set up the Linearity measurement, you must display the Results > Linearity
pane. The results panel for the measurement shows the settings that you can
change for the measurement. For Linearity, you can choose the line on which the
measurement is made and the number of times the measurement is averaged.
To change the settings for the Linearity measurement:
1. On the menu bar, click Results > Linearity.
2. To change the line number, click the Line Number box.
There are three ways to change the line number:
Turn the top knob on the front panel to change the number. When it is set to
the correct number, click outside the box to enter the change.
Click the keypad button to the left of the number entry box. Use the pop-up
keypad to enter a setting for the line number.
Using the keyboard to directly input the desired value.
3-90 VM5000 Automatic Video Measurement Set User Manual