04.10.2014 Views

User Manual - TRS-RenTelco

User Manual - TRS-RenTelco

User Manual - TRS-RenTelco

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Viewing Measurement Results<br />

Displaying Ch-Ch Skew Measurement Results<br />

Option VGA<br />

Configure the Ch-Ch Skew measurement as explained in Setting Up the Ch-Ch<br />

Skew Measurement on page 3 -85. Take the measurement by clicking the Run<br />

button. Click Results > Ch-Ch Skew. Refer to Figure 3 -41.<br />

Figure 3- 41: Ch-Ch Skew measurement results<br />

Measured Values<br />

Click the Measured tab to display the measured values in ns and (%)Pixel<br />

Clock.<br />

Relative Values<br />

If Relative to Reference testing is enabled, you can display the calculated relative<br />

values by clicking the Relative tab (see Taking Measurements Relative to a<br />

Reference on page 3 -60).<br />

Reference Values<br />

If Relative to Reference testing is enabled, you can display the reference values<br />

by clicking the Reference tab (see Creating a Custom Reference File on<br />

page 3 -62).<br />

Limit Values<br />

If Limit testing is enabled, you can display the Limit values by clicking the<br />

Limits tab (see Taking Measurements with Limit Testing on page 3 -64). The<br />

minimum and maximum values are set in the limits file for the supported<br />

combination of resolution, refresh rate, and timing standard.<br />

VM5000 Automatic Video Measurement Set <strong>User</strong> <strong>Manual</strong> 3-115

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!