User Manual - TRS-RenTelco

Operating Basics
Setting the Measurement Warnings
1. On the menu bar, click
Configuration > Warnings.
Option SD/HD
Option VGA
1 1
2. The instrument displays the
Warnings view. These settings
control how the instrument sets
up the Warning Types Reported
and the Control Options when
you select the Run button.
2
3. Select the warning messages to
report when a warning occurs.
Seepage3-7formore
information.
3
4. Select how to report warning
messages by selecting the check
boxes in the control options
pane. Messages can be
displayed in a window or
logged to a file.
4
If Log Warnings To File is selected, the warnings are written to the Log.txt file (Option SD/HD at
C:\VM5000TV or Option VGA at C:\VM5000PC). Warnings are appended to the Log.txt file until it
reaches 1 MB in size. At that point, it is renamed LogOld.txt and a new Log.txt file is created. If the
new file reaches 1 MB in size, it will be renamed LogOld.txt and will be written over the existing
LogOld.txt file. If you wish to save the data in the LogOld.txt file, you must save the file under a
different name before it is overwritten.
VM5000 Automatic Video Measurement Set User Manual 2-33