User Manual - TRS-RenTelco

Table of Contents
List of Figures
Figure 1-1: Instrument space requirements .................... 1-6
Figure 1 -2: Locations of VM5000 Option VGA connectors ....... 1 -7
Figure 1-3: On/Standby switch location ....................... 1-8
Figure 1 -4: Displaying measurement values in color bars
measurement .......................................... 1 -16
Figure 1 -5: Format panel ................................... 1 -18
Figure 1-6: Results Summary display ......................... 1-19
Figure 1 -7: Color Bars measurement results display ............ 1 -19
Figure 1-8: H Sync measurement results display ................ 1-20
Figure 1-9: V Sync measurement results display ................ 1-20
Figure 1-10: Video Transient measurement results display ....... 1-20
Figure 2 -1: Connecting the T-connector to the VM5000 .......... 2 -1
Figure 2 -2: RGBHV Measurement Interface Unit ............... 2 -2
Figure 2 -3: VGA connector to 5X cable ....................... 2 -2
Figure 2-4: Connecting the Sync Pickoff to the instrument ....... 2-3
Figure 2-5: Connection of 3-wire video with composite sync,
Setup 1 ............................................... 2-4
Figure 2 -6: Connection of 3-wire video with composite sync,
Setup 2 ............................................... 2-5
Figure 2 -7: Connection of 4 -wire video with separate composite
sync .................................................. 2 -6
Figure 2 -8: Connection of the PC video card to the VM5000 using
RGBHV Measurement Interface Unit ...................... 2 -7
Figure 2 -9: Connection of the DUT to the RGBHV Measurement
Interface Unit .......................................... 2 -8
Figure 2 -10: Connection of the RGBHV Measurement Interface Unit
to the VM5000 ......................................... 2 -8
Figure 2 -11: Connecting the RS-232C cable between the
Measurement Interface Unit and the VM5000 ............... 2 -9
Figure 2 -12: Selection of the Use MIU option on the Configuration >
Operation tab .......................................... 2 -9
Figure 2-13: Connecting the VGA to 5X cable to the input channel 2-10
Figure 2 -14: Building the 2.21 kΩ and 301 Ω terminations ....... 2 -11
Figure 2 -15: Connecting the PC video output signals to the VM5000 2 -11
Figure 2 -16: Appearance of the pop-up warning when making
H Sync measurement ................................... 2 -12
VM5000 Automatic Video Measurement Set User Manual
v