User Manual - TRS-RenTelco

Operating Basics
The Matrix Test Signal
The Matrix test signal incorporates all the analog video signal requirements
within one file (different files are used for Option SD/HD and Option VGA).
Using this single test file eliminates the need to change test signals when running
different measurements. The Matrix test signal is provided with the Signal
Source Disks accessory. You can select the setup file (.vmset) that matches the
format of the Matrix test signal. The default line number setting is provided for
each measurement type. You can change the line number as needed. See
Appendix E, Signal Source Set for a full description of the files in the Signal
Source Set.
Figure 2 -23 shows the Option SD/HD Matrix test signal. Table 2 -2 shows the
signal elements.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Figure 2- 23: Option SD/HD Matrix signal
2-16 VM5000 Automatic Video Measurement Set User Manual