Doppler Weather Radar - METNET - India Meteorological Department

(ii) SC. (E) In-Charge Radar Lab, DDGM (UI)
(iii) DWR In-Charge or any other concerned In-Charge of Doppler Radar Station
(v) M/s SGS Weather, if necessary
(vi) Put a note in T- Log regarding the starting of radar by Mentioning time and date.
1.14. Standardizing a product
Archiving old data corresponding to a past special weather event and generating new
products for validating the radar products.
Suppose we need to get raw data of the period 03-07-2010 to 08-07-2010.The raw data product
generates a compressed product file containing all of the signal processor data parameters
collected during the selected task. As the raw product cannot be displayed, but it can be archived
to tape or sent to another IRIS analysis system in network. Once these raw products
corresponding to the above period is selected and reingested, ingest files are created, so that
products images can be generated in the other server for analysis or testing for standardization.
Procedure:
Irisconnectlocal host (remote or internet server)menusdeviceldasite type raw
give wild timegive date month and yearfiles wildmountcommandretrivewatch files
being retrivedcommandreingestsee files being reingested
Configure the required product, say, TS-100, for the same period, i.e., 03-07-2010 to 08-07-
2010, and schedule it. The TS-100 products can now be seen in quick look window. Now, if the
TS-100 is not reflecting the warning time correctly, change one or three parameters of TS-100
and generate again with another name till it represents the thunderstorm time and intensity
perfectly. Then the product TS-100 is said to be validated with the new name.
25