C:\Documents and Settings\Allen - MSAWorld.com
C:\Documents and Settings\Allen - MSAWorld.com
C:\Documents and Settings\Allen - MSAWorld.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Removing the coin box:<br />
1. Disconnect power from the dryer <strong>and</strong> remove the top<br />
panel <strong>and</strong> coin box.<br />
2. Using a security Torx # 27 bit, remove the (4) screws<br />
holding the coin box to the top panel <strong>and</strong> lift the coin<br />
box off.<br />
Removing the holddown bolt:<br />
1. Disconnect power <strong>and</strong> remove the top panel.<br />
2. Using a 3/4” wrench, remove the spacer from the<br />
bolt. The bolt will drop out the bottom.<br />
Removing the gasket between the coin box<br />
<strong>and</strong> the top panel:<br />
1. Disconnect power from the dryer <strong>and</strong> remove the<br />
coin box from the top panel.<br />
2. Lift off the gasket.<br />
Removing the holddown bar:<br />
1. Disconnect power <strong>and</strong> remove the top panel.<br />
2. Remove the (4) screws, two in the front <strong>and</strong> two in<br />
the rear, holding the bar to the front brace <strong>and</strong> the<br />
rear panel.<br />
Removing the door switch:<br />
1. Disconnect the dryer from electrical supply, open<br />
the door <strong>and</strong> remove the top.<br />
2. Disconnect the wires from the door switch.<br />
57