C:\Documents and Settings\Allen - MSAWorld.com
C:\Documents and Settings\Allen - MSAWorld.com
C:\Documents and Settings\Allen - MSAWorld.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Push the idler pulley to the right <strong>and</strong> slip the belt off<br />
the motor pulley.<br />
4. Using the belt to raise rear of the drum to release the<br />
ball from the hitch <strong>and</strong> move the drum out the front.<br />
Removing the vane from the drum:<br />
1. Disconnect the dryer from electrical supply.<br />
2. Open the door, remove the top panel <strong>and</strong> the (2)<br />
screws holding the vane to the drum. The vane will<br />
drop into the drum.<br />
Removing the belt:<br />
1. Disconnect the dryer from electrical supply.<br />
2. Remove the top <strong>and</strong> front panels.<br />
3. Release the belt from the motor.<br />
4. From the front,slightlyraise the front of thedrum <strong>and</strong><br />
slide the belt off the drum.<br />
Removing the drum:<br />
1. Disconnect the dryer from electrical supply.<br />
2. Remove the top <strong>and</strong> the front panels.<br />
3. Release the belt from the motor.<br />
62
Change language