33 12 16.26 - 001-A - Butterfly Valves - Garney Construction

More documents

Recommendations

Info

3”-20” 2FII & Groundhog® Bonded Seat <strong>Butterfly</strong> Valve TROUBLESHOOTING GUIDE Problem Causes Remedies Leakage between valve and actuator •Packing Leak •First, cycle the valve several times. This should adjust the packing. If this fails, clean packing bore and replace packing. Bottom trunnion leaks •Packing or gasket leak •Replace bottom shaft packing, o-ring or gasket. Valve leaks when closed •Disc not fully closed or past fully closed •Adjust actuator closed position stop. •Disc edge wear or damage •Clean and/or repair disc edge. •Rubber seat wear or damage •Replace valve seat (Bonded seat vavles 20” or below must be returned to factory for repair). Chainwheel jams •Poorly fitting chain •Replace with correct chain. Valve hard to operate •Foreign material in valve •Remove obstructions Automatic valve does not actuate •Corroded actuator parts •Loose actuator •No power source •Improper Signal •Burned out or impaired component •Clean and grease actuator •Apply Loctite or Omnifit locking compound and tighten bolts. •Check incoming power source and replace fuses or rest pressure. •Check actuating signal sequence. •Check and repair or replace solenoids, motors and relay devices. Document #: 3202FIIGD Revision Date: 7/13/10 10
3”-20” 2FII & Groundhog® Bonded Seat <strong>Butterfly</strong> Valve HOW TO CONTACT PRATT HOW TO ORDER PARTS: To order parts, contact our Parts Department: Write: - Henry Pratt Company 401 South Highland Avenue Aurora, IL 60506-5563 Attn: Parts Manager Call - (630) 844-4144 Fax - (630) 844-4191 Please include valve serial number and description of part requested. HOW TO OBTAIN SERVICE: To obtain further information or secure field service, contact our Field Service Department: Write: - Henry Pratt Company 401 South Highland Avenue Aurora, IL 60506-5563 Attn: Field Service Manager Call - (630) 844-4163 Fax - (630) 844-4160 Please include the following with your inquiry for service: Henry Pratt Order Number: Henry Pratt Item Number: Valve Serial Number: Type of Service Requested Document #: 3202FIIGD Revision Date: 7/13/10 11
Page 1 and 2:
Garney Construction 785 E Warren Ga
Page 3 and 4:
Page 173 Page 174 Page 179 Page 179
Page 6 and 7:
Ward County Water Supply Expansion
Page 8 and 9:
1513188 HP Page 1 of 5 401 South Hi
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 61 and 62:
AWWA Butterfly Valves 3" - 20" Engi
Page 63 and 64:
Scope of Line: AWWA In-Plant Rubber
Page 65 and 66:
Features and Benefits: of Pratt Mod
Page 67 and 68:
Dimensional Data: Model 2FII, Flang
Page 69 and 70:
401 S. Highland Avenue Aurora, Illi
Page 71 and 72: 3" through 20" Butterfly Valves Sco
Page 73 and 74: Design Details: Models 511A and 510
Page 75 and 76: Suggested Specification for the Hen
Page 77 and 78: Actuator Dimensional Data for Model
Page 79 and 80: Figure 511 24" - 72" Class 150 B Fl
Page 81 and 82: PRATT PRODUCT GUIDE Model 2FII Mono
Page 83 and 84: 401 S. Highland Avenue Aurora, Illi
Page 85 and 86: A Tradition of Excellence With the
Page 87 and 88: Scope of Line: Triton XR-70 Butterf
Page 89 and 90: Design Details: Triton XR-70 Butter
Page 91 and 92: E-Lok Seat Design Years of Reliable
Page 93 and 94: Water Flow Characteristics Proven P
Page 95 and 96: Valve End Types and Dimensions: Mec
Page 97 and 98: Actuation Traveling Nut Type Manual
Page 99: 401 S. Highland Avenue Aurora, Illi
Page 102 and 103: SCOPE OF THE LINE: PRATT HP250II B
Page 104 and 105: THE HENRY PRATT SEAT ON BODY DESIGN
Page 106 and 107: HP250II 3"- 20", DUCTILE IRON BODY
Page 108 and 109: 401 S. Highland Avenue Aurora, Illi
Page 110 and 111: Suggested Specification: Butterfly
Page 112 and 113: 6" - 24" HP350 Mechanical Joint End
Page 114 and 115: 3”-20” 2FII & Groundhog® Bonde
Page 126 and 127: Triton XR-70,Triton XL & Groundhog
Page 140 and 141: 24”-48” HP250II Butterfly Valve
Page 152 and 153: HP350 Butterfly Valve 6”-24” (M
Page 154 and 155: HP350 Butterfly Valve Table of Cont
Page 156 and 157: HP350 Butterfly Valve INSTALLATION
Page 158 and 159: HP350 Butterfly Valve TESTING When
Page 160 and 161: HP350 Butterfly Valve WARNING Fluid
Page 162 and 163: HP350 Butterfly Valve TROUBLESHOOTI
Page 164 and 165: HP350 Butterfly Valve Cross Section
Page 166 and 167: Diviner Position Indicator SAFETY M
Page 168 and 169: Diviner Position Indicator FUNCTION
Page 170 and 171: Diviner Position Indicator INSTALLA
Page 172 and 173:
Diviner Position Indicator HOW TO C
Page 174 and 175:
PAINT SYSTEM SUMMARY Page 1 of 5 SY
Page 176 and 177:
Page 3 of 5 UL/FM HENRY PRATT COMPA
Page 178:
Page 5 of 5 UL/FM HENRY PRATT COMPA
Page 181 and 182:
A Tradition of Excellence With the
Page 183 and 184:
MANUAL ACTUATORS Spur G
Page 185 and 186:
MANUAL ACTUATORS
Page 187 and 188:
FEATURES & BENEFITS OF THE TRAVELIN
Page 189 and 190:
ACTUATOR EXTENSIONS
Page 191 and 192:
ACTUATOR EXTENSIONS
Page 193 and 194:
ACTUATOR EXTENSIONS
Page 195 and 196:
ACTUATOR EXTENSIONS
Page 197 and 198:
ACTUATOR EXTENSIONS
Page 199 and 200:
ACTUATOR EXTENSIONS
Page 201 and 202:
ACTUATOR EXTENSIONS
Page 203 and 204:
PRATT Henry Pratt Company TITLE: OP
Page 205 and 206:
AUMA Data Sheet AUMA Comm No.: A000
Page 209 and 210:
GS50.3 GS63.3 GS80.3 GS100.3 GS125.
Page 211 and 212:
Dimensions Valve postion indicator
Page 213 and 214:
Technical data valve position indic
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
.
Page 221 and 222:
.
Page 223 and 224:
.
Page 225 and 226:
.
Page 227 and 228:
.
Page 229 and 230:
. .
Page 231 and 232:
. .
Page 233 and 234:
.
Page 235 and 236:
. .
Page 237 and 238:
.
Page 239 and 240:
.
Page 241 and 242:
.
Page 243 and 244:
Anschlusspläne APG Terminal plans
Page 245 and 246:
Bevel gearboxes GK 10.2 - GK 40.2 O
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
AUMA - wordwide Europe AUMA Riester
Page 267 and 268:
AUMA Riester GmbH & Co. KG P.O.Box
Page 269 and 270:
Worm gearboxes GS 50.3 - GS 250.3 O
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Worm gearboxes GS 50.3 - GS 250.3 .
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
North American Sales and Service: U
Page 301 and 302:
IQ Electric Motor Actuator Data She
Page 303 and 304:
Page 305 and 306:
Page 309 and 310:
NOT ROTORK SUPPLY X ACTUATOR TERMIN
Page 318 and 319:
PRATT Henry Pratt Company TITLE: OP
Page 320 and 321:
Introduction Rotork’s proven IQ r
Page 322 and 323:
Actuator electrical specification P
Page 324 and 325:
Actuator electrical specification P
Page 326 and 327:
Control specification Interlocks Ex
Page 328 and 329:
Indication options Indication Optio
Page 330 and 331:
Actuator circuit diagram - basic IQ
Page 332 and 333:
Actuator circuit diagrams - number
Page 334 and 335:
Remote control circuits Remote cont
Page 336 and 337:
Analogue control circuits Analogue
Page 338 and 339:
UK head office Rotork Controls Limi
Page 340 and 341:
The Rotork Setting Tool allows actu
Page 343 and 344:
CONTENTS Page 1 Health and Safety 2
Page 345 and 346:
2 Storage 3 Operating your IQ Actua
Page 347 and 348:
5 3.4 Display-Alarm Indication The
Page 349 and 350:
4 Preparing Drive Bush 7 4.1 IQ10 t
Page 351 and 352:
9 Fig. 4.9 Type A Drive Bush in Pos
Page 353 and 354:
11 5.1 Rising Stem Valves - Top Mou
Page 355 and 356:
13 5.7 IQML Adjusting Linear Stroke
Page 357 and 358:
15 6.4 Connecting to Terminals On E
Page 359 and 360:
17 7.2 The Setting Tool Specificati
Page 361 and 362:
19 7.7 Procedure Branch - Crossroad
Page 363 and 364:
21 Viewing the Primary Function Set
Page 365 and 366:
C2 Close Action 23 The actuator can
Page 367 and 368:
tC Torque Value Closing 25 The valu
Page 369 and 370:
LC Set Limit Closed LO Set Limit Op
Page 371 and 372:
Fig. 9 9 Commissioning - Secondary
Page 373 and 374:
SECONDARY FUNCTIONS CONTENTS page 9
Page 375 and 376:
1 Contact S1 - Value r1 Contact S1
Page 377 and 378:
A4 ESD Override Interlocks A5 ESD O
Page 379 and 380:
9.4 Option Extra Indication Contact
Page 381 and 382:
9.6 Option Folomatic Remote Control
Page 383 and 384:
Fd Deadband Adjustment Ft Motion In
Page 385 and 386:
9.8 Bus System Option Pakscan [OP]
Page 387 and 388:
PF Pakscan Remote Auxiliary Input 4
Page 389 and 390:
9.9 Bus System Option Modbus [OP] P
Page 391 and 392:
PF Modbus Remote Auxiliary Input PP
Page 393 and 394:
9.10 Bus System Option Profibus DP
Page 395 and 396:
PF Profibus Remote Auxiliary Input
Page 397 and 398:
9.11 Option DeviceNet PA DeviceNet
Page 399 and 400:
PF DeviceNet Remote Auxiliary Input
Page 401 and 402:
Fd All positioning commands are sub
Page 403 and 404:
JO Position in Valve Opening Stroke
Page 405 and 406:
9.16 Default Options [d1] and [d2]
Page 407 and 408:
10 Maintenance, Monitoring and Trou
Page 409 and 410:
10 Maintenance, Monitoring and Trou
Page 411 and 412:
H3 Factors Inhibiting Electrical Op
Page 413 and 414:
H6 Torque Switch Status & IR Settin
Page 415 and 416:
10.2 IrDA Diagnostics & Config. IQ
Page 417 and 418:
BHD Binary, Hexadecimal and Decimal
Page 419 and 420:
If your Rotork actuator has been co
Page 421 and 422:
New Zealand Wellington Agent North
Page 424:
Heading ATTENTION: RED PLASTIC PLUG
show all

33 12 16.26 - 001-A - Butterfly Valves - Garney Construction

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?