33 12 16.26 - 001-A - Butterfly Valves - Garney Construction

More documents

Recommendations

Info

Suggested Specification (24" and Larger) General: All butterfly valves shall be of the tight closing, rubber seat type conforming to the design standards of ANSI/AWWA C504 latest revision. Valves shall be bubble-tight at the rated pressure in either direction and shall be suitable for throttling service and/or operation after long periods of inactivity. Manufacturer shall have a minimum of five (5) years experience producing AWWA butterfly valves. Body: All valve bodies shall be constructed of ASTM A126 Class B cast iron. Flanged valves shall have ANSI B16.1 flanges with class 125# drilling. Mechanical Joint Valves shall have ends conforming to the ANSI/AWWA C111/A21.11 standard. Seat: On 24” and larger valves the seat shall be adjustable and replaceable in the field without the use of special tools. Valve seats on valves 24” and larger will be designed for bi-directional adjustment without removal of the seat. Valve designs with the rubber seat on the disc are not acceptable. Disc: The discs shall be constructed of ASTM A536 Ductile Iron with a 316 stainless steel edge. 24” and larger discs will be the flow through design. Shaft: The valve shaft shall be constructed of stainless steel ASTM A276 type 304. On valves 24” and larger, a taper pin of 316 stainless steel will be used as the disc/shaft connection. Bearings: All shaft bearing shall be of the self-lubrication, corrosion-resistant sleeve type. Bearings shall be designed for horizontal and/or vertical shaft loading. Packing: On valves 24” and larger the packing will be V-type. All packing will be self adjusting and wear compensating. Valve packing arrangement shall be designed so that actuator removal will not result in packing seal failure. Paint: Valves 24” and larger will be lined and coated with a liquid epoxy conforming to AWWA C550 and NSF61. Coatings will be a minimum of 8 mils DFT. Testing: All valves shall be hydrostatic and leak tested in accordance with ANSI/AWWA C504. Manual Actuators: Manual actuators shall be AWWA approved worm gear actuators. The actuator incorporates a hardened worm with bronze heavy duty quadrant locking type and shall be designed to hold the valve in any intermediate position between fully open and fully closed without creeping or fluttering. Worm gear to be rated 450 foot pounds at the stops. Valves shall be Henry Pratt model 511/510 or approved equivalent. page 11
PRATT PRODUCT GUIDE Model 2FII Monoflange MKII Plug Valve Triton ® XR70 Indicating Butterfly Valve UL & FM approved Tilting Disc Check Valve Triton ® XL N-Stamp Nuclear Butterfly Valve Cone Valve Rectangular PIVA Post Indicating Valve Assembly UL & FM approved Sleeve Valve Rubber Seated Ball Valve Triton ® HP250 Check Valve Groundhog ® Valve Control Systems Compact Controllable Energy Dissipater Metal Seated Ball Valve Henry Pratt Company 401 South Highland Avenue Aurora, Illinois 60506-5563 United States 630-844-4000 Fax 630-844-4160 www.henrypratt.com ISO 9001: 2000 Certified ©2012 Henry Pratt Company | Printed in the U.S.A. | AWWA BFV 0112
Page 1 and 2:
Garney Construction 785 E Warren Ga
Page 3 and 4:
Page 173 Page 174 Page 179 Page 179
Page 6 and 7:
Ward County Water Supply Expansion
Page 8 and 9:
1513188 HP Page 1 of 5 401 South Hi
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 61 and 62: AWWA Butterfly Valves 3" - 20" Engi
Page 63 and 64: Scope of Line: AWWA In-Plant Rubber
Page 65 and 66: Features and Benefits: of Pratt Mod
Page 67 and 68: Dimensional Data: Model 2FII, Flang
Page 69 and 70: 401 S. Highland Avenue Aurora, Illi
Page 71 and 72: 3" through 20" Butterfly Valves Sco
Page 73 and 74: Design Details: Models 511A and 510
Page 75 and 76: Suggested Specification for the Hen
Page 77 and 78: Actuator Dimensional Data for Model
Page 79: Figure 511 24" - 72" Class 150 B Fl
Page 85 and 86: A Tradition of Excellence With the
Page 87 and 88: Scope of Line: Triton XR-70 Butterf
Page 89 and 90: Design Details: Triton XR-70 Butter
Page 91 and 92: E-Lok Seat Design Years of Reliable
Page 93 and 94: Water Flow Characteristics Proven P
Page 95 and 96: Valve End Types and Dimensions: Mec
Page 97 and 98: Actuation Traveling Nut Type Manual
Page 99: 401 S. Highland Avenue Aurora, Illi
Page 102 and 103: SCOPE OF THE LINE: PRATT HP250II B
Page 104 and 105: THE HENRY PRATT SEAT ON BODY DESIGN
Page 106 and 107: HP250II 3"- 20", DUCTILE IRON BODY
Page 110 and 111: Suggested Specification: Butterfly
Page 112 and 113: 6" - 24" HP350 Mechanical Joint End
Page 114 and 115: 3”-20” 2FII & Groundhog® Bonde
Page 126 and 127: Triton XR-70,Triton XL & Groundhog
Page 128 and 129: Triton XR-70,Triton XL & Groundhog
Page 130 and 131:
Triton XR-70,Triton XL & Groundhog
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
24”-48” HP250II Butterfly Valve
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
HP350 Butterfly Valve 6”-24” (M
Page 154 and 155:
HP350 Butterfly Valve Table of Cont
Page 156 and 157:
HP350 Butterfly Valve INSTALLATION
Page 158 and 159:
HP350 Butterfly Valve TESTING When
Page 160 and 161:
HP350 Butterfly Valve WARNING Fluid
Page 162 and 163:
HP350 Butterfly Valve TROUBLESHOOTI
Page 164 and 165:
HP350 Butterfly Valve Cross Section
Page 166 and 167:
Diviner Position Indicator SAFETY M
Page 168 and 169:
Diviner Position Indicator FUNCTION
Page 170 and 171:
Diviner Position Indicator INSTALLA
Page 172 and 173:
Diviner Position Indicator HOW TO C
Page 174 and 175:
PAINT SYSTEM SUMMARY Page 1 of 5 SY
Page 176 and 177:
Page 3 of 5 UL/FM HENRY PRATT COMPA
Page 178:
Page 5 of 5 UL/FM HENRY PRATT COMPA
Page 181 and 182:
A Tradition of Excellence With the
Page 183 and 184:
MANUAL ACTUATORS Spur G
Page 185 and 186:
MANUAL ACTUATORS
Page 187 and 188:
FEATURES & BENEFITS OF THE TRAVELIN
Page 189 and 190:
ACTUATOR EXTENSIONS
Page 191 and 192:
ACTUATOR EXTENSIONS
Page 193 and 194:
ACTUATOR EXTENSIONS
Page 195 and 196:
ACTUATOR EXTENSIONS
Page 197 and 198:
ACTUATOR EXTENSIONS
Page 199 and 200:
ACTUATOR EXTENSIONS
Page 201 and 202:
ACTUATOR EXTENSIONS
Page 203 and 204:
PRATT Henry Pratt Company TITLE: OP
Page 205 and 206:
AUMA Data Sheet AUMA Comm No.: A000
Page 209 and 210:
GS50.3 GS63.3 GS80.3 GS100.3 GS125.
Page 211 and 212:
Dimensions Valve postion indicator
Page 213 and 214:
Technical data valve position indic
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
.
Page 221 and 222:
.
Page 223 and 224:
.
Page 225 and 226:
.
Page 227 and 228:
.
Page 229 and 230:
. .
Page 231 and 232:
. .
Page 233 and 234:
.
Page 235 and 236:
. .
Page 237 and 238:
.
Page 239 and 240:
.
Page 241 and 242:
.
Page 243 and 244:
Anschlusspläne APG Terminal plans
Page 245 and 246:
Bevel gearboxes GK 10.2 - GK 40.2 O
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
AUMA - wordwide Europe AUMA Riester
Page 267 and 268:
AUMA Riester GmbH & Co. KG P.O.Box
Page 269 and 270:
Worm gearboxes GS 50.3 - GS 250.3 O
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Worm gearboxes GS 50.3 - GS 250.3 .
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
North American Sales and Service: U
Page 301 and 302:
IQ Electric Motor Actuator Data She
Page 303 and 304:
Page 305 and 306:
Page 309 and 310:
NOT ROTORK SUPPLY X ACTUATOR TERMIN
Page 318 and 319:
PRATT Henry Pratt Company TITLE: OP
Page 320 and 321:
Introduction Rotork’s proven IQ r
Page 322 and 323:
Actuator electrical specification P
Page 324 and 325:
Actuator electrical specification P
Page 326 and 327:
Control specification Interlocks Ex
Page 328 and 329:
Indication options Indication Optio
Page 330 and 331:
Actuator circuit diagram - basic IQ
Page 332 and 333:
Actuator circuit diagrams - number
Page 334 and 335:
Remote control circuits Remote cont
Page 336 and 337:
Analogue control circuits Analogue
Page 338 and 339:
UK head office Rotork Controls Limi
Page 340 and 341:
The Rotork Setting Tool allows actu
Page 343 and 344:
CONTENTS Page 1 Health and Safety 2
Page 345 and 346:
2 Storage 3 Operating your IQ Actua
Page 347 and 348:
5 3.4 Display-Alarm Indication The
Page 349 and 350:
4 Preparing Drive Bush 7 4.1 IQ10 t
Page 351 and 352:
9 Fig. 4.9 Type A Drive Bush in Pos
Page 353 and 354:
11 5.1 Rising Stem Valves - Top Mou
Page 355 and 356:
13 5.7 IQML Adjusting Linear Stroke
Page 357 and 358:
15 6.4 Connecting to Terminals On E
Page 359 and 360:
17 7.2 The Setting Tool Specificati
Page 361 and 362:
19 7.7 Procedure Branch - Crossroad
Page 363 and 364:
21 Viewing the Primary Function Set
Page 365 and 366:
C2 Close Action 23 The actuator can
Page 367 and 368:
tC Torque Value Closing 25 The valu
Page 369 and 370:
LC Set Limit Closed LO Set Limit Op
Page 371 and 372:
Fig. 9 9 Commissioning - Secondary
Page 373 and 374:
SECONDARY FUNCTIONS CONTENTS page 9
Page 375 and 376:
1 Contact S1 - Value r1 Contact S1
Page 377 and 378:
A4 ESD Override Interlocks A5 ESD O
Page 379 and 380:
9.4 Option Extra Indication Contact
Page 381 and 382:
9.6 Option Folomatic Remote Control
Page 383 and 384:
Fd Deadband Adjustment Ft Motion In
Page 385 and 386:
9.8 Bus System Option Pakscan [OP]
Page 387 and 388:
PF Pakscan Remote Auxiliary Input 4
Page 389 and 390:
9.9 Bus System Option Modbus [OP] P
Page 391 and 392:
PF Modbus Remote Auxiliary Input PP
Page 393 and 394:
9.10 Bus System Option Profibus DP
Page 395 and 396:
PF Profibus Remote Auxiliary Input
Page 397 and 398:
9.11 Option DeviceNet PA DeviceNet
Page 399 and 400:
PF DeviceNet Remote Auxiliary Input
Page 401 and 402:
Fd All positioning commands are sub
Page 403 and 404:
JO Position in Valve Opening Stroke
Page 405 and 406:
9.16 Default Options [d1] and [d2]
Page 407 and 408:
10 Maintenance, Monitoring and Trou
Page 409 and 410:
10 Maintenance, Monitoring and Trou
Page 411 and 412:
H3 Factors Inhibiting Electrical Op
Page 413 and 414:
H6 Torque Switch Status & IR Settin
Page 415 and 416:
10.2 IrDA Diagnostics & Config. IQ
Page 417 and 418:
BHD Binary, Hexadecimal and Decimal
Page 419 and 420:
If your Rotork actuator has been co
Page 421 and 422:
New Zealand Wellington Agent North
Page 424:
Heading ATTENTION: RED PLASTIC PLUG
show all

33 12 16.26 - 001-A - Butterfly Valves - Garney Construction

Create successful ePaper yourself

Delete template?

Save as template?