33 12 16.26 - 001-A - Butterfly Valves - Garney Construction

C3
Open Action
24
The actuator can be configured to
open on torque for back seating valves
or limit for non back seating valves.
Refer to valve manufacturer for
recommended setting. In the
absence of valvemaker instructions
set “Open Limit”.
Using the + or - key display the desired
option.
NOTE: When set to open on torque,
the actuator will apply the value of
torque as set for [tO] in back seating
the valve (refer to [tO] page 26).
50
◗
[Ot] in the Setting Field Indicates
Open on Torque - defualt setting.
◗
P? ❖ PC ❖ Ir ❖ Ic
◗
cr
◗
c1 ❖ c2 ❖ c3
◗
tC ❖ tO
◗
LC ❖ LO
◗
50
[OL] in the Setting Field Indicates
Open on Limit
PRESS THE KEY.
The displayed option will flash,
indicating that it has been set.
PRESS THE ❖ KEY.