Table Of Contents

3.3 Removing Pipette
The pipette is held by the arm and connected to the tower by two small cables. Detach
the two cables from the top of the tower. First pull up on the tiny tabs on each side of the
locking pieces. The cables should slide out of their sockets. Loosen the screw on the side of the
arm to remove the pipette.
1. 2. 3.
4. 5.
To reinsert the pipette, place the pipette in the socket on the arm and tighten the screw. Insert the
cables into their slots, and press the locking pieces back down to hold them. The white cable
goes in the slot to the rear of the instrument, and the orange/brown cable goes into the front slot.
1. 2. 3.
44