EWP Hangers - USP Connectors

Adjustable Strap Hangers – MSH series continued
© Copyright 2013 USP Structural Connectors ®
Joist
Material
& Width
or
Trusses
or
Trusses
or
Trusses
or
Trusses
or
I-Joist
or
I-Joist
I-Joist
I-Joist
Floor
Trusses
or
Trusses
or
Trusses
Floor
Trusses
Floor
Trusses
Floor
Trusses
Floor
Trusses
Floor
Trusses
Floor Trusses
Floor
Trusses
Floor
Trusses
I-Joist
I-Joist
USP
Stock No.
Steel Gauge
Mounting
Top Face
Vertical Uplift 1 Vertical Uplift 1 Vertical Uplift 1 Vertical Uplift 1
Ref. No. W H D B Condition Qty Type Qty Type Qty Type 100% 115% 100% 115% 100% 115% 100% 115%
face-max -- -- -- -- 18 10d 4 10d x 1-1/2 4770 1480 21.22 6.58 3390 1050 15.08 4.67
MSH29 THA29 18 1-5/8 8-3/4 2-1/4 5
MSH213 THA213 18 1-5/8 12-3/4 2-1/4
MSH218 THA218 18
1-5/8 16-3/4 2-1/4 5
MSH222 THAI222 18 1-5/8 23 1-3/4 10-13/16
MSH1713 -- -- 18 1-13/16 14-7/16 1-3/4 10-3/4
MSH1722 THAI1.81/22 18
22-7/8
MSH2022 THAI2.06/22 18 2-1/16 22-5/8 1-3/4 10-7/16
MSH2322
THAI3522
2-3/8 22-5/8 1-3/4 10-7/16
MSH322 THAI322 18 2-9/16 22-1/2 1-3/4 10-3/8
MSH218-2 THA218-2 16 3-1/8 17-3/4 1-3/4 10-1/16
MSH222-2 THA222-2 16 3-1/8 22-1/4 1-3/4 10-1/16
MSH418 THA418 16 3-9/16 17-1/2 1-3/4
14
16 3-5/8 22 1-3/4 9-13/16
MSH424 -- -- 16 3-5/8 22 2
3-5/8 26 1-3/4
22-1/8
MSH426-2 THA426-2 14 7-1/4 26-1/16 2
18
MSH413 THA413 16 3-9/16
MSH422
MSH422IF
MSH426
MSH426IF
MSH422-2
MSH422-2IF
THAI422
THAC422
THAC426
THA422-2
THAC422-2
MSH2622-2 -- -- 16
Dimensions (in)
1-3/4 10-3/4
1-3/4
16 3-9/16 21-1/2 1-3/4
14
1-13/16
14 7-1/4
7-5/8
11
9-1/4
MSH2322-2 -- -- 16 4-3/4 22 1-3/4 9-1/4
5-3/8 22 1-3/4 9-1/4
2
5
7-5/8
7-5/8
5-3/16
8
Fastener Schedule 2,3
Header Joist DF-L (Lbs)
Factored Resistance
DF-L (kN) S-P-F (Lbs)
top-max 4 10d 6 10d 4 10d x 1-1/2 4940 1480 21.98 6.58 3510 1050 15.61 4.67
top-min 4 10d 2 10d 4 10d x 1-1/2 3690 -- -- 16.41 -- -- 2620 -- -- 11.65 -- --
face-max -- -- -- -- 20 10d 4 10d 4770 1480 21.22 6.58 3390 1050 15.08 4.67
top-max 4 10d 6 10d 4 10d 4940 1480 21.98 6.58 3510 1050 15.61 4.67
top-min 4 10d 2 10d 4 10d x 1-1/2 3690 -- -- 16.41 -- -- 2620 -- -- 11.65 -- --
face-max -- -- -- -- 26 10d 4 10d x 1-1/2 4770 1480 21.22 6.58 3390 1050 15.08 4.67
top-max 4 10d 6 10d 4 10d x 1-1/2 4940 1480 21.98 6.58 3510 1050 15.61 4.67
top-min 4 10d 2 10d 4 10d x 1-1/2 3690 -- -- 16.41 -- -- 2620 -- -- 11.65 -- --
face-max -- -- -- -- 22 10d 4 10d x 1-1/2 3195 1120 14.21 4.98 2270 795 10.10 3.54
top-max 4 10d 6 10d 4 10d x 1-1/2 4255 1120 18.93 4.98 3020 795 13.43 3.54
top-min 4 10d 2 10d 4 10d x 1-1/2 3550 -- -- 15.79 -- -- 2520 -- -- 11.21 -- --
face-max -- -- -- -- 12 10d 4 10d 3195 1120 14.21 4.98 2270 795 10.10 3.54
top-max 4 10d 6 10d 4 10d 4255 1120 18.93 4.98 3020 795 13.43 3.54
top-min 4 10d 2 10d 4 10d x 1-1/2 3550 -- -- 15.79 -- -- 2520 -- -- 11.21 -- --
face-max -- -- -- -- 22 10d 4 10d x 1-1/2 3195 1120 14.21 4.98 2270 795 10.10 3.54
top-max 4 10d 6 10d 4 10d x 1-1/2 4255 1120 18.93 4.98 3020 795 13.43 3.54
top-min 4 10d 2 10d 4 10d x 1-1/2 3550 -- -- 15.79 -- -- 2520 -- -- 11.21 -- --
face-max -- -- -- -- 22 10d 4 10d 5510 1140 24.51 5.07 3910 810 17.39 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
face-max -- -- -- -- 22 10d 4 10d x 1-1/2 3195 1120 14.21 4.98 2270 795 10.10 3.54
top-max 4 10d 6 10d 4 10d x 1-1/2 4255 1120 18.93 4.98 3020 795 13.43 3.54
top-min 4 10d 2 10d 4 10d x 1-1/2 3550 -- -- 15.79 -- -- 2520 -- -- 11.21 -- --
face-max -- -- -- -- 22 10d 4 10d x 1-1/2 3195 1120 14.21 4.98 2270 795 10.10 3.54
top-max 4 10d 6 10d 4 10d x 1-1/2 4255 1120 18.93 4.98 3020 795 13.43 3.54
top-min 4 10d 2 10d 4 10d x 1-1/2 3550 -- -- 15.79 -- -- 2520 -- -- 11.21 -- --
face-max -- -- -- -- 16 10d 4 10d 3695 1140 16.44 5.07 2625 810 11.68 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
face-max -- -- -- -- 22 10d 4 10d 5510 1140 24.51 5.07 3910 810 17.39 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
face-max -- -- -- -- 14 10d 6 10d 5185 2955 23.06 13.15 3680 2100 16.37 9.34
top-max 4 10d 6 10d 6 10d 5120 2955 22.78 13.15 3635 2100 16.17 9.34
top-min 4 10d 2 10d 6 10d 3240 -- -- 14.41 -- -- 2300 -- -- 10.23 -- --
face-max -- -- -- -- 18 10d 6 10d 5185 2955 23.06 13.15 3680 2100 16.37 9.34
top-max 4 10d 6 10d 6 10d 5120 2955 22.78 13.15 3635 2100 16.17 9.34
top-min 4 10d 2 10d 6 10d 3240 -- -- 14.41 -- -- 2300 -- -- 10.23 -- --
face-max -- -- -- -- 22 10d 4 10d 5185 2955 23.06 13.15 3680 2100 16.37 9.34
top-max 4 10d 6 10d 4 10d 5120 2955 22.78 13.15 3635 2100 16.17 9.34
top-min 4 10d 2 10d 4 10d 3240 -- -- 14.41 -- -- 2300 -- -- 10.23 -- --
face-max -- -- -- -- 22 10d 4 10d 5510 1140 24.51 5.07 3910 810 17.39 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
face-max -- -- -- -- 36 10d 6 10d 6490 2420 28.87 10.77 4605 1720 20.48 7.65
top-max 4 10d 6 10d 6 10d 4775 2420 21.24 10.77 3390 1720 15.08 7.65
top-min 4 10d 2 10d 6 10d 2410 -- -- 10.72 -- -- 1710 -- -- 7.61 -- --
top-max 4 16d 8 16d 6 16d 6310 3225 28.07 14.35 4480 2290 19.93 10.19
top-min 4 16d 2 16d 6 16d 4480 930 19.93 4.14 3180 660 14.15 2.94
face-max -- -- -- -- 26 16d 6 16d 7875 2215 35.03 9.85 5590 1570 24.87 6.98
top-max 4 16d 10 16d 6 16d 7510 2215 33.41 9.85 5330 1570 23.71 6.98
top-min 4 16d 4 16d 6 16d 6185 -- -- 27.51 -- -- 4390 -- -- 19.53 -- --
face-max -- -- -- -- 22 10d 4 10d 5510 1140 24.51 5.07 3910 810 17.39 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
face-max -- -- -- -- 46 10d 4 10d 5510 1140 24.51 5.07 3910 810 17.39 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
face-max -- -- -- -- 46 10d 4 10d 5510 1140 24.51 5.07 3910 810 17.39 3.60
top-max 4 10d 6 10d 4 10d 5305 1140 23.60 5.07 3770 810 16.77 3.60
top-min 4 10d 2 10d 4 10d 3210 -- -- 14.28 -- -- 2280 -- -- 10.14 -- --
1) Factored uplift resistances have been increased 15% for short-term loads such as wind and earthquake; reduce for other load durations in accordance with the code.
2) Minimum nail embedment shall be 8 nail diameters (typ.).
3) NAILS:
red font.
1-800-328-5934 • www.USPconnectors.com 169
USP2240-131
S-P-F (kN)
Plated Truss