EWP Hangers - USP Connectors
EWP Hangers - USP Connectors
EWP Hangers - USP Connectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Threaded Rods – THR series<br />
<strong>USP</strong> has added longer length THR’s to support the new deck oriented<br />
code requirements for mechanically reinforced railing post and deck to<br />
house ledger board attachments.<br />
Materials: ASTM A 36 Steel, also conforms to ASTM F 1554 Grade 36<br />
Finish: Hot-dip galvanized<br />
L<br />
© Copyright 2013 <strong>USP</strong> Structural <strong>Connectors</strong> ®<br />
Installation:<br />
• Install into wet concrete or drill minimum 1 ⁄16" oversized hole and secure<br />
with anchor epoxy.<br />
• Nuts and washers are included.<br />
<strong>USP</strong><br />
Stock No. Ref. No.<br />
Bolt Dia.<br />
(in)<br />
L<br />
(in)<br />
THR125-HDG RFB#4X5HDG 1/2 5<br />
THR126-HDG RFB#4X6HDG 1/2 6<br />
THR128-HDG RFB#4X8HDG 1/2 8<br />
THR1218-HDG -- -- 1/2 18<br />
THR1224-HDG -- -- 1/2 24<br />
THR1236-HDG -- -- 1/2 36<br />
THR585-HDG RFB#5X5HDG 5/8 5<br />
THR588-HDG RFB#5X8HDG 5/8 8<br />
THR5812-HDG RFB#5X12HDG 5/8 12<br />
THR5816-HDG RFB#5X16HDG 5/8 16<br />
New products or updated product<br />
information are designated in red font.<br />
NEW<br />
SIZES<br />
Epoxy Coated Rebar – CRE24<br />
THR<br />
½" THR<br />
Threaded<br />
Rod<br />
Typical THR<br />
installation<br />
DTB-TZ<br />
Page 195<br />
Typical THR<br />
Deck to ledger installation<br />
Concrete & Masonry<br />
Two-foot epoxy coated rebar provides maximum protection<br />
against corrosion.<br />
Materials: A615 Steel<br />
Finish: Epoxy Dipped<br />
<strong>USP</strong><br />
Dimensions<br />
Stock No. Ref. No. Dia L<br />
CRE24 -- -- 10 mm 24"<br />
Round Nail Stake – NSR<br />
Nail stakes are used to secure form boards to prevent movement and<br />
bowing.<br />
Materials: Steel<br />
Finish: Black Primer<br />
Installation:<br />
• Fastener holes will accommodate up to a 16d duplex nail.<br />
<strong>USP</strong><br />
Dimensions (in)<br />
Stock No. Ref. No. Dia L<br />
NSR -- -- 3/4 18<br />
Retro Plate – RP6<br />
Uses heavy gauge HRPO steel and a large surface<br />
area to distribute seismic forces on masonry exteriors.<br />
L<br />
CRE24<br />
NSR<br />
Typical CRE24<br />
installation<br />
Typical NSR<br />
installation<br />
Materials: 3/8˝ plate<br />
Finish: <strong>USP</strong> primer<br />
Options: RP6 is available in Hot-dip<br />
galvanized. To order add HDG to<br />
stock number, as in RP6-HDG.<br />
6˝<br />
3˝<br />
3/4˝ dia.<br />
threaded rod<br />
Installation:<br />
• Install with a 3/4˝ diameter steel threaded rod.<br />
<strong>USP</strong><br />
Stock No. Ref. No.<br />
RP6 RP6<br />
3˝<br />
6˝<br />
RP6<br />
Typical RP6<br />
installation<br />
1-800-328-5934 • www.<strong>USP</strong>connectors.com<br />
29<br />
<strong>USP</strong>2240-131
Change language