EWP Hangers - USP Connectors

Protection Plates – ICPL series, KNS1, & PL4
Easy-to-install plates protect plumbing and power/communication wiring
from nail or screw penetration.
ICPL58 – Installs with nails.
KNS1 & PL4 – Prongs allow for quick installation.
Materials: 16 gauge
Finish: ICPL516-TZ – G-185 galvanizing;
All others – Galvanized
Options: ICPL58 is available in Triple Zinc. To order, add TZ to
stock number, as in ICPL58-TZ.
Installation:
• Use all specified fasteners. See Product Notes, page 10.
Typical
KNS1 & PL4
installation
H
H
Typical ICPL58
installation
W
H
ICPL58
© Copyright 2013 USP Structural Connectors ®
W
W
KNS1
PL4
Typical ICPL516-TZ
installation
W
H
Miscellaneous
USP
Steel
Dimensions (in) Fastener Schedule 1,2
Stock No. Ref. No. Thickness W H Qty Type
ICPL58 S/PSPN58 1/16 8-1/16 5 4 8d or prongs
PL4 NS2 1/16 2 5 -- -- prongs
KNS1 NS1 1/16 1-1/2 3 -- -- prongs
1) Minimum nail embedment shall be 8 nail diameters (typ).
2) NAILS:
USP
Stock No.
ICPL516-TZ
Dimensions (in)
Fastener Schedule 2,3 Factored Uplift Resistance 1
Steel
Installation
DF-L S-P-F
Ref. No. Thickness W H Type Qty Type Lbs kN Lbs kN
16 5
Sill Plate 12 16d HDG + prongs 1405 6.25 1205 5.36
Double Top Plate 16 16d HDG + prongs 1870 8.32 1600 7.12
PSPN516Z,
1) Factored uplift resistances have been increased 15% for short-term loads such as wind and earthquake; no further increase allowed.
2) Minimum nail embedment shall be 8 nail diameters (typ).
3) NAILS
ICPL516-TZ
186
1-800-328-5934 • www.USPconnectors.com