Leonardo 250-300 Repair Manual 2004 - Wheels Academy

LEONARDO 250 - 300
CYCLE PARTS
7.1.17. REMOVING THE CRASH HELMET COMPART-
MENT
• Remove any object (crash helmet, tool kit, use and
maintenance manual, etc.) from the crash helmet compartment.
• Remove the battery compartment, see 7.1.18 (RE-
MOVING THE BATTERY COMPARTMENT).
• Remove the rear part of the fairing, see 7.1.3 (REMOV-
ING THE REAR PART OF THE FAIRING).
• Unscrew and remove the five screws (1), and then remove:
- Starting relay (2);
- Control unit (3);
- Voltage regulator (4);
- Service control unit (for Leonardo 250, only) (5).
• Unscrew and remove the two screws (6) and remove
filter (7).
• Withdraw the electric cables of the battery, fuse carrier
and service warning light reset switch (for Leonardo
250, only) through the suitable holes.
• Unscrew and remove the two screws (8) rear part of
the frame.
• Lower the saddle.
• Remove the crash helmet compartment complete with
the saddle, by lifting it vertically.
7 - 23