Leonardo 250-300 Repair Manual 2004 - Wheels Academy
Leonardo 250-300 Repair Manual 2004 - Wheels Academy
Leonardo 250-300 Repair Manual 2004 - Wheels Academy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LEONARDO <strong>250</strong> - <strong>300</strong><br />
COOLING SYSTEM<br />
5.4. THE EXPANSION TANK<br />
5.4.1. REMOVING THE EXPANSION TANK<br />
• Position the vehicle on the central stand.<br />
• Remove the front inner shield, see 7.1.6 (REMOVING<br />
THE FRONT INNER SHIELD).<br />
WARNING<br />
DO NOT DISPOSE OF THE COOLANT IN THE<br />
ENVIRONMENT.<br />
When the hose (1) is withdrawn, the coolant<br />
present in the expansion tank (2) will flow out.<br />
Get a container with at least 1l capacity to collect<br />
the coolant. Put a cloth under the expansion<br />
tank, to absorb the coolant that might have<br />
been spilt.<br />
IMPORTANT Get pipe clamps screwdriver-type to replace<br />
the original ones (special type without screw).<br />
• Cut the clamp head (3).<br />
• Withdraw the hose (4) from the expansion tank coupling.<br />
• Cut the clamp head (5).<br />
• Withdraw the hose (1) from the expansion tank coupling<br />
(1).<br />
• Promptly put the container under the expansion tank<br />
and collect the coolant.<br />
WARNING<br />
The coolant is noxious.<br />
Keep the container in a safe place.<br />
KEEP AWAY FROM CHILDREN<br />
• Unscrew and remove the two screws (6).<br />
• Remove the expansion (2) tank.<br />
5 - 9