28.12.2014 Views

Leonardo 250-300 Repair Manual 2004 - Wheels Academy

Leonardo 250-300 Repair Manual 2004 - Wheels Academy

Leonardo 250-300 Repair Manual 2004 - Wheels Academy

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

COOLING SYSTEM<br />

LEONARDO <strong>250</strong> - <strong>300</strong><br />

5.2. RADIATOR<br />

5.2.1. REMOVING THE RADIATOR<br />

• Drain the coolant completely, see 2.5 (CHANGING<br />

THE COOLANT).<br />

• Remove the front inner shield, see 7.1.6 (REMOVING<br />

THE FRONT INNER SHIELD).<br />

• Remove the headlight, see 7.2.7 (REMOVING THE<br />

HEADLIGHT).<br />

• Disconnect power connector (1).<br />

• Disconnect power connector (2).<br />

IMPORTANT Get screwdriver-type pipe clamps, to replace<br />

the original ones (special type without screw).<br />

• Cut the head of the pipe clamps (3) and (4).<br />

IMPORTANT Upon reassembly, replace the clamps (3) and<br />

(4) with the new ones.<br />

• Withdraw the two hoses (5) and (6) from the radiator<br />

couplings.<br />

• Cut the head of the pipe clamp (7).<br />

IMPORTANT Upon reassembly, replace the clamp (7) with<br />

the new one.<br />

• Withdraw the breather pipe (8) from the radiator coupling.<br />

• Working from both sides, loosen and remove the<br />

screws (9) from radiator mounting bracket.<br />

• Loosen and remove centre screw (10) from radiator<br />

mounting bracket.<br />

• To remove radiator, slide it out from below.<br />

WARNING<br />

Proceed with care. Do not damage the radiator<br />

fins.<br />

• Remove radiator electric fan<br />

5 - 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!