28.12.2014 Views

Leonardo 250-300 Repair Manual 2004 - Wheels Academy

Leonardo 250-300 Repair Manual 2004 - Wheels Academy

Leonardo 250-300 Repair Manual 2004 - Wheels Academy

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CYCLE PARTS<br />

LEONARDO <strong>250</strong> - <strong>300</strong><br />

7.7.2. REPLACING THE FRONT BRAKE PADS<br />

• Remove the calliper,<br />

• Unscrew and remove the central screw (1).<br />

• Extract the retainer (2).<br />

• Remove the two retaining pins (3).<br />

• Extract the brake pads(4).<br />

CAUTION<br />

The brake pads must always be replaced in<br />

pairs. Ensure they become properly seated in<br />

the brake calliper.<br />

Take care not to reverse the retainer position.<br />

CAUTION<br />

Do not operate brake control lever once brake<br />

pads have been removed, so as to prevent calliper<br />

piston from coming out of its seating and<br />

thus brake fluid from leaking out.<br />

• Fit two new brake pads (4).<br />

• Insert the two calliper retaining pins (3).<br />

• Refit the retainer (2).<br />

• Tighten the central screw (1).<br />

• Locate the brake calliper on the disk.<br />

• Check brake fluid level, see 2.6.1 (BRAKES).<br />

7 - 54

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!