S90 XS/S70 XS Reference Manual - zZounds.com
S90 XS/S70 XS Reference Manual - zZounds.com
S90 XS/S70 XS Reference Manual - zZounds.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Reference</strong><br />
Part Edit<br />
Basic Structure<br />
Part Edit lets you edit the parameters of the individual Parts that make up a Multi.<br />
Operation<br />
[MULTI/SEQ PLAY] Select Multi programs [EDIT] Select the desired Part<br />
“1” – “16” in the Multi Edit Select display [ENTER] Select the desired<br />
display in the Multi Part Edit Select display [ENTER] Edit display<br />
Voice<br />
Performance<br />
Multi<br />
SEQ Play<br />
Master<br />
Remote<br />
File<br />
Audio Rec/Play<br />
Utility<br />
1 Voice<br />
Receive Ch (Receive Channel)<br />
Determines the MIDI receive channel for the selected Part. The MIDI transmit channel for the real-time changing of the<br />
controlled data is the same as this parameter setting.<br />
Settings: 01 – 16, off<br />
1<br />
4<br />
7<br />
2 5<br />
Bank<br />
Number<br />
Determines the Voice assigned to the current Part by specifying the Voice Bank and Number.<br />
NOTE: You can select a program by using the BANK [INC]/[DEC] buttons, [A] – [H] buttons, and Number [1] – [16] buttons in the<br />
“Bank” or “Number” section when the cursor is located at “Bank” or “Number” and the [PART]/[MUTE]/[SOLO] lamps are turned<br />
off. You can select the Voice corresponding to the current Part by pressing the [CATEGORY SEARCH] button.<br />
Param. with Voice (Parameter with Voice)<br />
3<br />
6<br />
Determines whether or not the following parameter settings of the selected Voice are copied from the Voice to the<br />
current Part when you change a Voice for the current Part individually.<br />
Arpeggio settings, Filter Cutoff Frequency, Filter Resonance, Amplitude EG, Filter EG, Pitch Bend Range (Upper/Lower),<br />
Note Shift, Assignable 1/2<br />
NOTE: Regardless of the Parameter with Voice setting, the following settings are always copied when a Normal Voice is selected:<br />
Mono/Poly, Porta Sw (Portamento Part Switch), Porta Time (Portamento Time) and Porta Mode (Portamento Mode).<br />
Settings: off (not copied), on (copied)<br />
Arp Play Only (Arpeggio Play Only)<br />
Determines whether or not the current Part plays only the note events of the Arpeggio playback. When this parameter is<br />
set to on, only the note events of the Arpeggio playback affect the tone generator block.<br />
Multi<br />
Play<br />
Mixing<br />
Edit Select<br />
Common Edit<br />
Name<br />
Arpeggio<br />
Controller<br />
Effect<br />
Parameter<br />
Master EQ<br />
A/D Out<br />
A/D FX<br />
Parameter<br />
Part Edit<br />
Voice<br />
Play Mode<br />
Arpeggio<br />
Arp Edit<br />
Arp 1-5 Type<br />
Filter/EG<br />
3 Band EQ<br />
Rcv Sw<br />
FX Send<br />
Job Select<br />
Recall<br />
Bulk<br />
Copy<br />
Initialize<br />
Appendix<br />
Settings: off, on<br />
<strong>Reference</strong> <strong>Manual</strong><br />
101