S90 XS/S70 XS Reference Manual - zZounds.com

Appendix
Wrong pitch or unexpected pitch
• Is the Tune parameter in the Utility mode set to a value other than “0”
[UTILITY] General Tune (page 133)
• Is the Note Shift parameter in the Utility mode set to a value other than “0”
[UTILITY] General Note Shift (page 133)
• When the Voice produces a wrong pitch, is the appropriate tuning system selected from
Micro Tune parameter in the Voice Edit mode
[UTILITY] Micro Tune (page 140)
• When the Performance/Multi produces a wrong pitch, is the Note Shift parameter of
each Part set to a value other than “0”
[PERFORM] [EDIT] Part selection Play Mode (page 82)
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection Play Mode (page 102)
No effect is applied
• Have the REVERB and CHORUS Knobs/Sliders been turned fully to the minimum
Basic Structure
Functional Blocks
Tone Generator
A/D Input
Arpeggio
Sequencer
Audio Record/Play
Controller
Effect
Internal Memory
Reference
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
• Have any or all of the effect types been set to “thru” or “off”
• Is the EFFECT ON/OFF parameter of each Effect set to OFF
• When this occurs in the Performance/Multi mode, check whether the Insertion Switch
(Ins Effect Sw) parameters are set properly or not.
[PERFORM] [EDIT] Part selection FX Send Ins Effect Sw (page 89)
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Part selection FX Send Ins Effect Sw (page 109)
Appendix
About MIDI
Display Messages
Troubleshooting
Vocoder does not work when selecting a Vocoder Voice
• Is the output of the A/D Input Part set to “vocoder”
[UTILITY] Voice A/D Out Output Select (page 141)
[PERFORM] [EDIT] Common A/D Out Output Select (page 78)
[MULTI/SEQ PLAY] (selecting Multi mode) [EDIT] Common A/D Out Output Select (page 98)
The Edit Indicator appears, even when parameters are not being edited
• Keep in mind that even though the Edit mode is not active, simply moving a Knob/
Slider changes the current Voice, Performance, or Multi, causing the Edit Indicator to
appear.
• Some Arpeggio types include MIDI Control Change messages. When you play back
such an Arpeggio type, the sound of the current Voice may inadvertently be changed
and the Edit Indicator may appear in the top right of the display.
Reference Manual
157