1 - BHEL - Industrial Systems Group
1 - BHEL - Industrial Systems Group
1 - BHEL - Industrial Systems Group
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>BHEL</strong>-ISG<br />
GENERAL SPECIFICATION FOR<br />
PILLING, CIVIL, STRUCTURAL & ARCHITECTURAL<br />
WORKS OF CHP & AHP PACKAGE<br />
2X250 MW BARAUNI THERMAL POWER PROJECT<br />
SPECIAL CONDITIONS OF CONTRACT<br />
SPECIFICATION NO<br />
IS- 1-10-2013 / 005<br />
DATE: 04/06/2011<br />
Volume-1<br />
Section - 6<br />
TOOLS AND PLANTS AND MACHINERY<br />
Providing of required Tools and plants and machinery for executing<br />
the subject work is the responsibility of Contractor. Minimum<br />
requirement of tools and plants and machinery shall be indicated in<br />
the offer.<br />
In the event of failure of contractor to bring necessary and sufficient<br />
T&Ps & Machinery, <strong>BHEL</strong> will be at liberty to arrange the same at the<br />
risk and cost of contractor including transportation cost of same from<br />
any of <strong>BHEL</strong> site/place and hire charges as applicable shall be<br />
deducted from contractor's bill. Decision of <strong>BHEL</strong> in this regard shall<br />
be final and binding on contractor.<br />
All distribution boards, connecting cables/welding cables, wire ropes,<br />
hoses etc., including temporary air/water/electrical connectors etc.<br />
shall have to be arranged by the contractor at his own cost.<br />
The contractor shall engage trained and experienced operators for the<br />
operation of T&P's and machinery. <strong>BHEL</strong> engineer will check their skill<br />
and performance before they are allowed to operate the same.<br />
However, checking of skills by <strong>BHEL</strong> does not absolve the contractor of<br />
his responsibilities for proper and safe handling of equipment,<br />
consistent good performance of operators and regular performance<br />
evaluation of operators.<br />
The day to day and routine maintenance of T&Ps and machinery<br />
should be carried out by contractor and these shall be maintained in<br />
good working condition during the entire period of use T&Ps in<br />
defective/damaged condition shall be rectified promptly to the full<br />
satisfaction of <strong>BHEL</strong> engineer. Contractor shall maintain records for<br />
maintenance of major T&Ps which shall be made available for<br />
inspection whenever required. In case of any lapses on the part of the<br />
contractor, <strong>BHEL</strong> at its own discretion get the servicing/repair of<br />
equipment done at the risk and cost of the contractor with <strong>BHEL</strong><br />
overheads as applicable time to time.<br />
The contractor shall arrange all spares needed for upkeep of all T&Ps<br />
ENQUIRY No.<br />
88/11/6010/AK<br />
REV. R0 PAGE 8 of 33