1 - BHEL - Industrial Systems Group

BHEL-ISG
GENERAL SPECIFICATION FOR
PILLING, CIVIL, STRUCTURAL & ARCHITECTURAL
WORKS OF CHP & AHP PACKAGE
2X250 MW BARAUNI THERMAL POWER PROJECT
SPECIAL CONDITIONS OF CONTRACT
SPECIFICATION NO
IS- 1-10-2013 / 005
DATE: 04/06/2011
Volume-1
Section - 6
open for supervision and verification by the Engineer-in-charge or his
authorized representative by any time when the Engineer-in-charge
feels the need to do so.
In the case of steel materials, the same shall be supplied generally on
the basis of weight and will be calculated as per Indian standard. For
the purpose of billing and accounting, only linear measurement
multiplied by the standard unit weight will be considered and the
difference between the measured weight and actual weight shall be to
contractor's account. Quoted price shall be deemed to include the
above. No claim whatsoever shall be entertained on account of
wastage and difference in weight as referred to above.
The contractor shall bear all incidental costs including site lifting,
carting from Issue points to site / contractor's store, custody and
handling etc.,
The contractor will have to submit their design mix for different grades
of concrete keeping in view the requirements stipulated in 1S-456. The
minimum cement content for various grades of concrete shall be as
specified in the design memorandum/ design basis report.
The contractor shall indemnify BHEL, its representatives or employees
against any action, claim or proceeding relating to infringement or use
of any patent or design or any alleged patent or design rights and shall
pay any royalties or other charges which may be payable in respect of
any article or material or part thereof included in the contract. In the
event of any claim being made or action being brought against BHEL
or any agent, servant or employee of BHEL in respect of any such
matters as aforesaid, the contractor shall immediately be notified
thereof, provided that such indemnity shall not apply when such
infringement has taken place in complying with the specific directions
issued by BHEL but the contractor shall pay any royalties or other
charges payable in respect of any such use, the amount so paid being
reimbursed to the contractor only if the use was the result of any
drawings and / or specifications issued after submission of the tender.
The engineer shall be entitled to have tests carried out as specified in
ENQUIRY No.
88/11/6010/AK
REV. R0 PAGE 12 of 33