1 - BHEL - Industrial Systems Group

BHEL-ISG
GENERAL SPECIFICATION FOR
PILLING, CIVIL, STRUCTURAL & ARCHITECTURAL
WORKS OF CHP & AHP PACKAGE
2X250 MW BARAUNI THERMAL POWER PROJECT
SPECIAL CONDITIONS OF CONTRACT
SPECIFICATION NO
IS- 1-10-2013 / 005
DATE: 04/06/2011
Volume-1
Section - 6
RECORD FOR MATERIALS CONSUMED
The contractor shall maintain and furnish to the engineer the record of
materials consumed in the works for each activity. The statement
showing the theoretical vis-a-vis actual consumption of specified
materials, such as structural steel, grouting compound, paint etc. shall
be enclosed along with the running bills submitted by the contractor.
Contractor has to also furnish the test results of the materials used in
the work as per IS specifications.
PROTECTION OF EMBEDMENTS, BOLTS ETC
The contractor shall ensure proper protection to the satisfaction of the
engineer, of all bolts, inserts, embedment etc. from weather etc. by
greasing, rapping them with gunny bags or canvas or by any other
means as directed by engineer. Cost of such protections shall be
deemed to be included in the rates quoted for the item.
CLEARANCE OF SITE AND REPAIRS
Contractor has to clear the site/area where mechanical and electrical
erection work is to be commenced or in progress. The contractor shall
remove construction materials and equipment lying in the vicinity and
causing obstruction in the erection work within 24 hrs. notice. In case,
he fails to clear the site, this will be done at his risk and cost by BHEL.
QUALITY ASSURANCE
The contractor shall submit the following quality document for approval
of BHEL and its client.
1. Quality plan for civil and structural works.
2. Welding procedure
3. Quality plan for painting work
4. Quality plan for sheeting work
ENQUIRY No.
88/11/6010/AK
REV. R0 PAGE 22 of 33