Manual for TUTA B2
Manual for TUTA B2
Manual for TUTA B2
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TUTA</strong>-<strong>B2</strong> GSM REMOTE CAMERA USER MANUAL<br />
• The quantity value should be in the range of 2-8.<br />
• If the image size is 640×480, up to 2 image quantity can be used.<br />
• The image size and image capturing interval time can be changed, see<br />
chapter 5.1.1 and 5.1.3.<br />
Successful SMS reply<br />
Alarm image quantity has been set successfully.<br />
MMS file name:<br />
• For wireless sensor alarm: Model-Time (Sensor name), such as <strong>TUTA</strong>-<br />
171154(Sensor 1).<br />
• For motion detection alarm: Model-Time (Motion detection), such as <strong>TUTA</strong>-<br />
171154 (motion detection).<br />
5.1.3 Image interval<br />
• For master and family users: #103#time# (63)<br />
• The Interval time values should be in the range from 3-10.<br />
• Each unit constitutes 100ms.<br />
• The default value is 5, i.e. 0.5 seconds.<br />
Successful SMS reply<br />
Capture image interval time has been set successfully: *<br />
5.2 Automatic alarm settings<br />
<br />
Description<br />
<strong>TUTA</strong> camera will enter auto-alarm mode and send notification messages (SMS<br />
and/or MMS) to the previously set numbers or e-mail addresses in one of the<br />
following two circumstances:<br />
• When motion is detected or<br />
• when the wireless sensors are triggered.<br />
The user sends the following edit message via SMS to <strong>TUTA</strong> camera in order to<br />
activate the following functions:<br />
5.2.1 Warning tone upon alarm triggering<br />
• For master and family users: #130#1# (64)<br />
40
Change language