User's Manual ZA-200 / ZA-250
User's Manual ZA-200 / ZA-250
User's Manual ZA-200 / ZA-250
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Powersupply<br />
If the POWERindicatordoesnotilluminate,checkthe following:<br />
Check<br />
Possible remedy<br />
Is the powez cable properly Turnoff the@nter, ensurethepowercable iasecurely<br />
plugged into tie electrical connec~ andthenturnthe printerbackortoutlet<br />
Is power being supplied to<br />
the outlet<br />
Istheprintervoltagecorrect<br />
Turn off the printer, unplug it. Try the outlet with<br />
anotherapplianceto determine if electricity is being<br />
suDDliedfmm thatoutlet.<br />
Checkthebottompanelofyourpirtter toensurethatthe<br />
outletvokagecorrespondstothevokagerequiredbythe<br />
printer.If theydonotmatck DONCYTtrytooperatethe<br />
printer.contact yoursupplier.<br />
Printing<br />
Ifyourprinterdoesnotprint,orsuddenlystopsprinting,checkthefollowing:<br />
Check<br />
Is the interface cable connected<br />
securely<br />
Is the ONLINEindicatorilluminated<br />
Is the PAPERindicatorilluminating<br />
Is the printer beeping intermittently<br />
Possible remedy<br />
Checkbothends of thecable - printerandcomputexto<br />
make sure thattheumnector is firmly in position.<br />
IfitisnoLpressthel ONLINE Jbuttontosettheprinter<br />
on-line.<br />
Ifit is, the papezhas runout. Loadmore paper.<br />
Thereletie leveris movedwhile thepaperisinprinting<br />
position.Movetherelease lever totheoriginalposition.<br />
Is the papercaughtup internally<br />
Turnoff thepower,removethejammedpaper,repla%<br />
turnontheprinter,andcontinue@nting.Makesurethat<br />
theloadingedge of thepaperis smoothanduncreased.<br />
Istheribboncaughtuparound Turnoff thepower,reanovetheribbo~retension iLand<br />
theprint head<br />
replace it. w problemoccursmost frequentlywith a<br />
wornribbo~ so you mayneed to replace the ribbon.<br />
Is the softwareyou areusing<br />
properly-installed for your<br />
Minter<br />
Cantheprinter performselftest<br />
operations ‘<br />
Check the installationsettings m your software, and<br />
reinstallif necessary.<br />
Tum theprinteroff, andturnit on agti holdingdown<br />
one of thebuttonsto performa self.test. If these do not<br />
work,contactyour dealer.
Change language