User's Manual ZA-200 / ZA-250

Papermenu
Thismenuallowsyou to setup varioushandlingoptionsof paper,
●
●
●
●
Paper-outdetector
Whenthisswitchis [DISABLED]theprinterignoresthepaper-outdetector
and prints down to (and beyond)the bottom edge. Otherwiseleave it
[*ENABLED].
Multi-partmode
Youcanuseupto 3-plypaperwithnonnalmode,[*DISABLED].Ifyouwant
to printon 4-plyor 5-plypaper,settheMulti-partmodeto [ENABLED].
AutomaticSheetFeeder
In orderto usetheoptionalAutomaticSheetFeeder,setthisswitchto the
Aated position.[SINGLE]for single-binASF, [DUAL-1]forthe tint bin
of Dual-binASF,and [DUAL-2]for the marbin of the Dual-binASF.
If youdonotusetheoptionalAutomaticSheetFeeder,leavethis [*OFF].
Autoloadingamountfor eachpapertype
Setsthe firstlinepositionon the eachpapertype.
Formsmenu
The Forms menu allowsyou to set variousoptionsassociatedwith paper
handling.
● Tear-Offfunction
Youcan selecttheTearOff functionwiththisswitch[ENABLED].
Whenusingfanfoldpaper,theTearOfffunctionallowsyoutotearoffone
sheetof paperwithoutfullyadvancingthefollowingshee&
● Skip-over-perforation
Youcan selectthe Skip-over-perforationwiththisswitch[ENABLED].
, It is recommendedto skipcloseto theperforationof fanfoldformsto get
goodprintquality.
Ifyoucannotsetthisfunctionwithyoursoftvwm, setthisswitch[ENABLED].
The printerautomaticallyskipstheperforations.
● AutoLineFeedwith CR
If you set this switch [*DISABLED],a separateline-feedcodeis required
horn yourcomputerto obtaina line feed.
If you set this switch [ENABLED],the printerperformsboth a carriage
mtum andlinefeedeachtimeit receivesa carriage-mtumcode.
Mostcomputersystemssendalinefeedcode,orbothacarriagereturnand
linefeed,attheend ofeachline,sothisswitchshouldbeleft[*DISABLED].
61