BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4<br />
Liftgate Installation<br />
CONSTRUCT MOUNTING JIG<br />
Cut a length of 3” angle, or similar material, approx. 70”<br />
long.<br />
Make two (2) plates with 1-3/16” dia. holes as shown.<br />
60-1/4"<br />
BETWEEN PLATES<br />
3" CHANNEL<br />
OR SIMILAR<br />
MARK CENTERLINE<br />
BETWEEN PLATES<br />
4<br />
1/4<br />
1/4<br />
1 3/8<br />
5 3/4<br />
n 1-3/16"<br />
3 1/8<br />
GR00498<br />
Locate and tack-weld the mounting jig to rear sill of<br />
body.<br />
Align the centerline marks of the jig with mark on sill.<br />
Verify the 1-3/8” and 3-1/8” dimensions.<br />
Note: For vehicles with swing doors, refer to section in<br />
back of manual “For Vehicles with Swing Doors”.<br />
GR00499<br />
11