BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4<br />
Liftgate Installation<br />
PLATFORM RUBBER STOPS<br />
If the vehicle is not equipped with at least side seals,<br />
rubber stops for the platform must be installed on the<br />
corner post of the body at a height of 2/3’s the height of<br />
the closed liftgate platform on both corner posts<br />
PLATFORM<br />
Install rubber stops as shown and adjust tilt cylinders so<br />
that the platform firmly contacts the stops when fully<br />
closed.<br />
Space rubber stops out from corner post as may be<br />
required. Spacers not provided.<br />
RUBBER STOP<br />
GR01605<br />
FLAT BED APPLICATIONS<br />
On flat bed applications, vehicle must be equipped with<br />
corner posts.<br />
Make sure that the corners post are strong enough to<br />
support forces from platform.<br />
RUBBER STOP OR<br />
PIECE OF SEALING<br />
Install rubber stops as shown and adjust tilt cylinders so<br />
that the platform firmly contacts the stops when fully<br />
closed.<br />
Space rubber stops out from corner post as may be<br />
required. Spacers not provided.<br />
GR01606<br />
32
Change language