BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FLIP-UP DOOR INSTALLATION<br />
Install Rubber Seals<br />
Rubber seals are installed on rear corner posts<br />
of vehicle.<br />
• Platform is to be flat against seals when<br />
liftgate is in closed position.<br />
Seal Channel to be<br />
flush with top of<br />
rear opening<br />
• Measure and cut to length both rubber<br />
seals.<br />
• Repeat for opposite side.<br />
Cut<br />
Rubber<br />
Seal 1”<br />
below Seal<br />
Channel<br />
Door Header<br />
(Top of Rear<br />
Opening)<br />
Platform and Corner<br />
Posts to be parallel<br />
Sill Extension<br />
Truck Floor<br />
GR00217<br />
80100622<br />
EO4970<br />
Rev 03<br />
5-2003<br />
53