BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION OF FULL-DOOR SEAL KIT<br />
Note:<br />
The Side Rubber Seals and Air Foils must be installed on the rear corner posts of<br />
vehicle before the Top Seal and Air Foil is installed.<br />
1. With the Platform in the stored position, find the location of the Top Double Rail according to<br />
Figure 1. Measure the distance from the vehicle floor to the top of the Top Double Rail and<br />
record the measurement as the ‘Y’ Dimension. Cut the Side Double Rails, Side Rubber Seals,<br />
and Side Air Foils to match the ‘Y’ Dimension.<br />
2. Find the location of the Side Double Rails on the vehicle corner posts. Measure the distance from<br />
the outer edge of one Side Double Rail to the outer edge of the other Side Double Rail and record<br />
this measurement as the ‘X’ Dimension. Cut the Top Double Rail, Top Rubber Seal, and Top Air<br />
Foil to match the ‘X’ Dimension. Refer to Step 4 for further instructions on how to position the<br />
Side Double Rails.<br />
Top Double Rail<br />
Platform<br />
Top of Rear Opening<br />
Y<br />
Rubber Sill & Rail<br />
Truck Floor<br />
Fig.1<br />
49