BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3 Basic Mounting Requirements<br />
DETERMINE MOUNTING DIMENSIONS<br />
Determine bed height. Measure from top of vehicle floor<br />
down to ground.<br />
Verify which length arms liftgate has.<br />
1-3/4”<br />
MOUNT TUBE<br />
CLEARANCE<br />
FLOOR LEVEL<br />
SILL DEPTH<br />
NOTE: All dimensions when vehicle unloaded on<br />
horizontal surface.<br />
“A”- DIMENSION<br />
IMPORTANT! Do not exceed given A- dimension or<br />
max bed height. This can cause damage to liftgate and<br />
improper operation of liftgate.<br />
GROUND<br />
GROUND<br />
CLEARANCE<br />
BED<br />
HEIGHT<br />
Additional mounting configurations and dimensions may<br />
be available by contacting the <strong>Waltco</strong> Engineering<br />
Department.<br />
Note! Always use the smallest A-<br />
dimension possible.<br />
GR00494<br />
FRAME WIDTH<br />
Liftgates can be mounted to trucks and trailers with max<br />
frame width 45- 1/2”.<br />
45-1/2” MAX<br />
Additional mounting configurations and dimensions may<br />
be available by contacting the <strong>Waltco</strong> Engineering<br />
Department.<br />
77- 3/4”<br />
GR00655<br />
MOUNTING BRACKETS<br />
13-1/4<br />
Mounting brackets height may need to be trimmed in<br />
order to achieve desired A- dimension.<br />
IMPORTANT! Do not modify mounting bracket bolts,<br />
nuts or mounting surfaces that are in contact with mount<br />
tube.<br />
8-1/4<br />
1-1/8<br />
7 15-3/16<br />
2-7/16<br />
3-1/4<br />
GR00495<br />
8