BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4<br />
Liftgate Installation<br />
MOUNT LIFTGATE TO MOUNTING JIG<br />
Disconnect all four (4) cylinders from the lift arms.<br />
Remove the temporary shipping pins from the tilt<br />
cylinders and lift arms.<br />
Remove the lock nuts and pins from the lift cylinders<br />
and lift arms.<br />
Note: The outer two cylinders are the tilt cylinders.<br />
Do not remove any pins from mount frame.<br />
GR00060<br />
Check that lift arm assembly pivots freely on pivot pins<br />
in mount frame.<br />
If necessary, loosen nuts on pivot pins indicated.<br />
GR00061<br />
Position liftgate mount frame on a floor jack or other<br />
type of lifting device.<br />
Rotate lift arms up to the mounting jig.<br />
Temporarily secure lift arms to mounting jig with long<br />
bolts and nuts supplied with liftgate or platform.<br />
Other means may be used to support<br />
Mount Frame in position. ALWAYS verify<br />
the safety of your supporting method<br />
before proceeding.<br />
GR00062<br />
12