BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4<br />
Liftgate Installation<br />
HYDRAULIC AUTOMATIC TILT<br />
For units equipped with Auto-tilt, install the angle<br />
sensor. The angle sensor should be positioned on the<br />
lift arm as shown:<br />
GR02802<br />
CONSTRUCTION OF TILT CYLINDER<br />
1. Screw<br />
2. Adjustable collar<br />
3. Washer<br />
4. Lock screw (x3)<br />
5. Ring<br />
6. Ring’s Lock Screw<br />
Ring’s Lock Screw<br />
GR02803<br />
ADJUSTING TILT UP ANGLE<br />
Note: Do not adjust the tilt cylinders before they are<br />
installed onto the platform. Tilt cylinders are preadjusted<br />
at the factory.<br />
Note: Make sure<br />
the grease zerk<br />
Is facing upwards<br />
Position and install cylinder as shown:<br />
GR02813<br />
29
Change language