BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4<br />
INSTALLATION OF 3-PIECE BUMPER<br />
Liftgate Installation<br />
Install (3) piece bumper as shown.<br />
NOTE: All (3) pieces need to be installed!<br />
Bumper bars have three height adjustment possibilities;<br />
all bumper bars must be installed to same height<br />
position.<br />
Every bumper bar must be secured with three bolts and<br />
lock nuts (supplied).<br />
GR02819 & GR00507<br />
SWING DOOR APPLICATION<br />
Platform must be spaced away from the vehicle such<br />
that when the liftgate is in the closed position it does not<br />
contact the door hardware.<br />
Note: Sill extension is not used with vehicles with swing<br />
doors.<br />
SPACE PLATFORM FROM<br />
DOOR HARDWARE<br />
SPACE OUT RUBBER STOP<br />
Note: Rubber stops for platform must be spaced out if<br />
bridge piece is used.<br />
GR00111<br />
<strong>33</strong>
Change language