BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FLIP-UP DOOR INSTALLATION<br />
Install Pull-Strap.<br />
Drill 3/8” dia. hole<br />
Attach pull-strap with 3/8” nut and bolt<br />
Note: Pull-strap is located<br />
inside of door<br />
Drill 3/8” dia.<br />
Hole thru<br />
IMPORTANT:<br />
Overlap 4 Layers<br />
Curb Side<br />
Side Angle<br />
Door<br />
10”<br />
3”<br />
3/8”<br />
Lock nut<br />
Washer<br />
3/8” Carriage Bolt<br />
GR00222<br />
Locate Drip Rail<br />
Use following formula to determine drip<br />
rail height on the door.<br />
Flip-Up<br />
Door<br />
Add both platform height and door<br />
height plus 3”, then subtract rear<br />
opening height.<br />
Rail height = (Platform height + Door<br />
height + 3”) – (Rear<br />
opening height)<br />
Door<br />
Height<br />
Drip Rail<br />
Height<br />
Drip<br />
Rail<br />
Rear<br />
Opening<br />
Height<br />
Platform<br />
Height<br />
Pull-Strap<br />
Truck<br />
Floor<br />
GR00223<br />
57
Change language