BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4<br />
Liftgate Installation<br />
INSTALL REAR SILL EXTENSION<br />
Cut extension so it will extend to within ½” of each side<br />
to vehicle body.<br />
Position and weld extension, centered on door opening.<br />
Note: If the full door seal kit, or flip-up door option are to<br />
be used, they will use a different type of sill extension.<br />
Note: For vehicles with swing doors, refer to the section<br />
in the back of this chapter “Swing door application”.<br />
GR00086<br />
POSITIONING OF PLATFORM<br />
Using the raise switch, raise lift arms up off the ground<br />
as shown.<br />
Lift Platform Using an Over-Head Crane or Forklift as<br />
shown.<br />
Other means may be used to support the<br />
platform in position. ALWAYS verify the<br />
safety of your supporting method before<br />
proceeding.<br />
GR00087<br />
INSTALLATION OF LIFT ARMS<br />
Align the Lift Arms with the upper holes in the Platform<br />
Hinges.<br />
Pin the Lift Arms to the Platform Hinges as shown.<br />
Secure pins with lock nuts.<br />
Platform hinge<br />
(inner plate)<br />
Platform hinge<br />
(outer plate)<br />
Platform hinge<br />
(middle plate)<br />
Pin tang to fully engage in<br />
hole of platform hinge<br />
(middle plate)<br />
GR01762<br />
25
Change language