BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
BZ-33, 44 Series - Waltco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FLIP-UP DOOR INSTALLATION<br />
Measure across rubber seals.<br />
• Measure outside to outside of bulb<br />
seals, as shown.<br />
• Do not deform seals while taking this<br />
measurement.<br />
Top view of vehicle<br />
and seals<br />
Outside distance of bulb seal<br />
Body opening<br />
Bulb seal<br />
Outside of<br />
bulb seal<br />
Air Foil<br />
seal<br />
Note: Legs of side angles will fold in between<br />
bulb seal and air foil.<br />
Side Angle of door will<br />
fold in between seals<br />
GR00302 / 303<br />
Install Aluminum Side Angles<br />
Position 7”x1” aluminum side angles on door.<br />
• Both angles to be ¼” wider than bulb<br />
seals.<br />
Drill 3/16” dia. holes through the side angles<br />
and door extrusions only.<br />
Note: Do not drill into the<br />
door wood material.<br />
Use eight (8) 1” screws (supplied) to fasten<br />
side angles to door.<br />
GR00221<br />
56