STARTING GUIDE FRENIC-Eco . FRN-F1 - Welcome to Fuji Electric
STARTING GUIDE FRENIC-Eco . FRN-F1 - Welcome to Fuji Electric
STARTING GUIDE FRENIC-Eco . FRN-F1 - Welcome to Fuji Electric
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
For Example: Set-point set by keypad and feedback from a transducer (transmitter) connected in current input C1 (figure 2),<br />
forward operation.<br />
F02=0 (Start-S<strong>to</strong>p: keypad, FWD/REV but<strong>to</strong>n)<br />
F07=1.0 (Acceleration time 1)<br />
F08=1.0 (Deceleration time 1)<br />
E40=7.00 (7 bar max)<br />
E41=0.00 (0 bar min)<br />
E43=10 (PID set-point value)<br />
PID parameters:<br />
J01=1 (PID active, forward operation)<br />
J02=0 (PID set value from keypad)<br />
E62=5 (PID feedback value by current input C1)<br />
J03 (PID control P-gain)<br />
J04 (PID control I-gain)<br />
J05 (PID control D-gain)<br />
J06 (PID control Feedback filter)<br />
Pressure transmitter<br />
+VDC<br />
GND<br />
<strong>FRN</strong><strong>F1</strong>S<br />
PLC (24VDC / max. 100mA)<br />
C1 (signal 4-20mA)<br />
CM<br />
11<br />
Chapter 6: Function codes and application example 30
Change language