STARTING GUIDE FRENIC-Eco . FRN-F1 - Welcome to Fuji Electric

More documents

Recommendations

Info

8. SPECIFICATIONS AND EXTERNAL DIMENSIONS 8.1 IP20 / IP00 specifications Chapter 8: Specifications and external dimensions 32
8.2 IP54 specifications Output ratings Input ratings Braking Item Specifications Type (FRN___F1L-4E) 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 Nominal applied motor [kW] *1) 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 Rated capacity [kVA] *2) 1.9 2.8 4.1 6.8 9.5 12 17 22 28 33 44 54 64 77 105 128 Rated voltage [V] *3) Three-phase 380V,400V/50Hz, 380V,400V,440V,460V/60Hz (With AVR function ) Rated current [A] *4) 2.5 3.7 5.5 9.0 12.5 16.5 23 30 37 44 59 72 85 105 139 168 Overload capability 120% of rated current for 1min Rated frequency 50, 60Hz Main power supply Three-phase,380 to 480V,50/60Hz Three-phase, 380 to 440V/50Hz 380 to 480V/60Hz Auxiliary control power input Single-phase,380 to 480V,50/60Hz Single-phase, 380 to 440V/50Hz 380 to 480V/60Hz Auxiliary power input for the fans *9) - Single-phase, 380 to 440V/50Hz 380 to 480V/60Hz Voltage/frequency variations Voltage: +10 to -15% (Voltage unbalance: 2% or less *8) ), Frequency: +5 to -5% Rated current [A] *5) 1.6 3.0 4.5 7.5 10.6 14.4 21.1 28.8 35.5 42.2 57.0 68.5 83.2 102 138 164 Required power supply capacity [kVA] *6) 1.2 2.2 3.1 5.3 7.4 10 15 20 25 30 40 48 58 71 96 114 Torque *7) [%] 20 10 to 15 DC injection braking Starting frequency: 0.0 to 60.0Hz, Braking time: 0.0 to 30.0s, Braking level: 0 to 60% EMC filter Standard conformance: Immunity: 2nd Env. (EN61800-3: 1996+A11:2000) Emission: Class A Group 1 (EN55011: 1998+A1: 1999+A2: 2002) DC REACTOR (DCRE) Input power factor : 86% or more at 100% load(Output Rating) KEY PAD Multifunctional Keypad (TP-G1W) Applicable safety standards EN50178:1997 Enclosure IP54(IEC60529) / UL TYPE 12(UL50) Cooling method Natural cooling Fan cooling Weight / Mass [kg] 12.5 12.5 13 14 14 22 22 24 34 35 40 54 56 74 76 86 *1) Fuji's 4-pole standard motor. *2) Rated capacity is calculated by regarding the output rated voltage as440V for three-phase 400V series. *3) Output voltage cannot exceed the power supply voltage. *4) Motor temperature gets higher or current limit function of the inverter is easy to operate if carrier frequency is set to low. Continuous or peak load shall be reduced to avoid high motor temperature or current limit operation. When setting the carrier frequency (F26) to 1 kHz or below, reduce the load to 80% of rated load or below for use. *5) Calculated under Fuji-specified conditions. *6) Obtained when a DC reactor (DCRE) is used. *7) Average braking torque without optional braking resistor (varies with the efficiency of the motor). Max. voltage [V] Min. voltage [V] *8) Voltage unbalance = × 67% (IEC61800 3(5.2.3)) Three - phase average voltage [V] If this value is 2 to 3%, use an AC reactor (ACR). *9) Normally no need to be connected. Use these terminals when the inverter is used with a power regenerative PWM converter (e.g. RHC series). Chapter 8: Specifications and external dimensions 33
Page 1 and 2: STARTING GUIDE FRENIC-Eco . FRN-F1
Page 3 and 4: CONTENTS Chapter Page 1. SAFETY INF
Page 5 and 6: 1. SAFETY INFORMATION AND CONFORMIT
Page 7 and 8: 1.2 Conformity to European standard
Page 9 and 10: 3. ELECTRICAL INSTALLATION 3.1. Pow
Page 11 and 12: 3.4. Digital inputs (X1, X2, X3, X4
Page 13 and 14: 3.6 Setting up the slide switches S
Page 15 and 16: 5. QUICK START COMMISSIONING 5.1 In
Page 17 and 18: 6. FUNCTION CODES AND APPLICATION E
Page 19 and 20: E codes: Extension terminal functio
Page 21 and 22: Code Name Setting range Default set
Page 23 and 24: P codes: Motor parameters P01 Code
Page 25 and 26: Code Name Data setting range Defaul
Page 27 and 28: J40 J41 Code Name Data setting rang
Page 29 and 30: 6.2 Application examples 6.2.1 Line
Page 31 and 32: Timing scheme: ISW50 COMMERCIAL POW
Page 33 and 34: When setting J02 to 1, you have to
Page 35: 7. TROUBLESHOOTING Alarm code Alarm
Page 39 and 40: FRN37F1S-4 to FRN560F1S-4 Units exp
Page 41 and 42: 8.3.3 Keypad dimensions TP-E1 Units
Page 43 and 44: Drawing 4 Drawing 5 Drawing 6 DC Re
Page 45 and 46: FS5536 - 50 - 07 FS21312 - 78 - 07
Page 47 and 48: 9. OPTIONS 9.1 Options table Main o
Page 49: CONTACT INFORMATION Headquarters Eu

STARTING GUIDE FRENIC-Eco . FRN-F1 - Welcome to Fuji Electric

Create successful ePaper yourself

Delete template?

Save as template?