TAC Pneumatic Products Catalog

515
2390-515)
TAC PNEUMODULAR � Pressure Regulator
The S515 pressure regulator allows the manual
setting of any desired air pressure, up to main
pressure, where the application requires remote
positioning of final control devices, remote control
point adjustment of receiver controllers, or any
other application where manual setting of an
output pressure is desired.
Features:
• Pressure regulator allows any desired pressure (up to main
air pressure) to be set with a 5/64 in. hex wrench.
• Mounts on MCS-S Socket or K502 Mounting Bracket.
• TAC PNEUMODULAR: All ports clearly labeled. Ports align
with MCS-S terminals.
Model Chart
Model No.
Accessories
Wholesale
Model No.
Typical Applications
Function Comments
S515 2390-515 Pressure regulator 0 to main air pressure output
S515 (2390-515)
Active Connections
Port Connected to
M Main
B Branch
Specifications
Action
Construction
Proportional.
Case Glass-filled nylon.
Knob Black sunburst plastic.
Maximum ambient temperature 140�F (60�C).
Supply air pressure Clean, dry, oil free air required (Ref. EN-123).
Nominal 20 to 25 psig (138 to 172 kPa).
Maximum 30 psig (207 kPa).
Connections Barbed fittings for 1/4 in. O.D. polyethylene or 5/32 in. I.D. polyurethane tubing.
Air consumption 28.8 scim (7.9 mL/s).
Air capacity 230.4 scim (62.9 mL/s).
Mounting
Dimensions
Designed for use on MCS-S manifold socket. These devices can also be mounted on a panel face or
surface mounted by using the appropriate mounting bracket (refer to Accessories).
S515 2-1/16 H x 1-7/8 W x 1-61/64 D in. (52 x 48 x 50 mm).
Model No. Wholesale Model No. Description
N100-0010 � Restrictor tee for copper and plastic tubing.
TOOL-082 � 5/64 in. hexhead wrench.
Mounting Bracket
K502 22-150 Mounting bracket.
M
M B
Branch Air to
Control Device
S2 M
F-27383-1
S515
Pressure Regulator
© Copyright 2006 TAC. All Rights Reserved. 115
S515
B S1
Figure 1 S515 Typical Application.