TAC Pneumatic Products Catalog

Model Chart (Continued)
Model No. a
Wholesale
Model No. b Model No. a
Wholesale
Model No. b Dial Range
�F (�C)
W/O Dial Limit Stops With Dial Limit Stops
T32-301 2218-132 T32-3011
T12 through T33 Series (2211 through 2218 Series)
2218-142
2218-532 c
T32-321 2218-134 � �
T33-301 2218-133 � �
55 to 85
(13 to 39)
Air
Consumption
31.1 scim
at 16 psig
(8.5 mL/s at
110 kPa)
43.2 scim
at 25 psig
(11.8 mL/s at
172 Kpa)
22.5 scim
at 13 psig
(6.1 mL/s at
90 kPa)
34.5 scim
at 18 psig
(9.4 mL/s at
124 kPa)
29.4 scim
at 15 psig
(8 mL/s at
103 kPa)
34.5 scim
at 20 psig
(9.4 mL/s at
138 Kpa)
Description
(Refer to Following Pages for
More Detail)
Summer-Winter, throttling range
adjustable 2� to 12�.
16 psig Main � R.A., Summer.
25 psig Main � D.A., Winter.
(Can be used with 8 psig summer
main if recalibrated in the field.)
T32-3011 same as T32-301 but has
factory-installed
10-59 setpoint stops.
Summer-Winter Thermostat for use
with Honeywell 13 to 18 psig
Systems.
13 psig Main � R.A., Summer.
18 psig Main � D.A., Winter.
Summer-Winter Thermostat for use
with Johnson main air systems.
25 psig Main � R.A., Summer.
16 psig Main � D.A., Winter.
a All thermostats include: Two mounting screws.
b
All wholesale thermostats include: One or two 1/4 x 3/16 in. tubing reducer(s), 20-693 tubing, 20-714 wall plate, 20-711 mounting plate, and two mounting
screws.
c
This is a thermostat kit; refer to Kit Model Chart on page 122.
Cover Options
Thermostat covers are available in various styles to meet particular requirements. Cover options include models with setpoint
scale and thermometer, setpoint scale only, thermometer only, or blank. An external setpoint adjustment cover is available with
all models and can be field installed on covers where required.
Covers must be ordered separately, refer to Cover Selection Table on page 25.
F-27383-1 © Copyright 2006 TAC. All Rights Reserved. 121