TAC Pneumatic Products Catalog

AKS-1100
Accessory Scale Plates (must be ordered separately).
Model No. Description For Use with the Following Transmitters
AKS-1129 �5�F Scale TKS-5001, TKS-6001, T150-1062, T150-1073
AKS-1130
AKS-1131
Closed ��Open
Open ��Closed
Actuators
AKS-1149 �5.5�C Scale T150-1011, -1012, -1013, -1021, -1022, -1023, -1082, -1083
AKS-1169 �20�F Scale T150-1031, T150-1035
AKS-1189 �8% R.H. Scale HKS-2033, -5033
AKS-1199 �2 in. Water Scale HKS-2033, -5033
Typical Applications
B M 2 1 A
RKS-3002
RKS-4002, RKSR-4000
Receiver Controller
AKS-1100
1 Shown with Internal Restrictor.
2
B M 2 1 A
RKS-3002
RKS-4002, RKSR-4000
Receiver Controller
Shown With External Restrictor.
Figure 1 Typical Setpoint Adjuster Application.
AKS-1100
NOTES: These apply to all receiver-controllers:
1. When internal restrictor is used, AKS-1100 must be located within 200 ft. (61 m) of receiver-controller.
2. When external restrictor is used, AKS-1100 must be located within 1000 ft. (305 m) of receiver-controller, and the
restrictor must be located within 200 ft. (61 m) of the transmitter (preferably at the transmitter’s location). Remove
internal restrictor from receiver-controller and install blocking gasket.
14 © Copyright 2006 TAC. All Rights Reserved. F-27383-1
M
N100-0010