TAC Pneumatic Products Catalog

Accessories
Typical Applications
Figure 1 Typical Application.
TKS-5001, TKS-5001-600, TKS-6001
Model No. Description
AT-201 Copper bulb well.
AT-203 Stainless steel bulb well.
AT-208 Duct mounting kit for TKS-40xx.
AT-211 Bulb shield for wall mounting TKS-2031.
AT-504 Plaster hole cover (small).
AT-505 Surface mounting base.
AT-506 Pneumatic wall box fitting (two tubes) used for mtg. AT-532-11-1-01 under cover of TKS-5001.
AT-509 Wall box required for TKS-5001-600.
AT-532-098-1-1 0.0075 restrictor (white).
AT-532-098-1-2 .005 in. restrictor (Red).
AT-532-098-1-3 .010 in. restrictor (Blue).
AT-532-111-1-01 0.0075 tee restrictor for 5/32 in. plastic tubing.
AT-532-111-1-03 .010 in. Tee restrictor. 5/32 in. tubing.
AT-532-222-2-01 .0075 in. Tee restrictor 1/4 in. tubing dual for TK-5000 Series.
AT-533-101 Adaptor 1/4 in. plastic to 5/32 in. plastic.
AT-533-127 Adaptor 3/16 in. copper or 1/4 in. copper with 1/4 in. solder coupling (not included) to 5/32 in. plastic.
AT-533-129 5/32 in. x 5/32 in. barbed brass connector.
TOOL-015 Spanner head driver for #6 spanner head screws.
3
To Main M
1
2
TKS-Transmitter
1 Required for TKS-5001-600 only (omit
external restrictor).
2 Transmitter located less than 200 Ft.
(61m) from restrictor.
3 Transmitter located less than 1000 Ft.
(305m) from Receiver Gauge.
F-27383-1 © Copyright 2006 TAC. All Rights Reserved. 155