TAC Pneumatic Products Catalog

Illustration Model No. Description
TOOL-074 Insertion tool � 5/32 in. plastic tube.
TOOL-076
TOOL-077
TOOL-078
Adaptor-branch line and test gauge for TK-5xxx and TKR-5xxx type pneumatic room
thermostat.
Also included in TOOL-096.
Tools
Adaptor-test gauge to branch line for TK-2xxx, TK-3xxx, and TK-4xxx type pneumatic bulb
thermostat.
Can be used with TOOL-087. Also included in TOOL-096.
Adaptor for test gauge TOOL-077 to branch test port for HK-1x12, TK-1xxx, T K-6xxx,
TK-8xxx, TK-9xxx, and TK-1xxxx type pneumatic thermostat.
Also included in TOOL-095-1 and TOOL-096.
TOOL-079 Spring hook to disconnect springs on TK Series pneumatic thermostats.
TOOL-082
TOOL-085
Pocket wrench with 5/64 in. Allen wrench for branch test port on TK Series pneumatic
thermostats and locking cover screws and 0.048 in. 6-spline wrench for thermostat
clalibration.
Manual hand pump bulb for pumping up actuators to check linkage. Also included in TOOL-
095-1.
TOOL-086 Gauges and tubing for adapting TOOL-085 to both barbed and compression fittings.
TOOL-087 Needle and adaptor for use with 1/4 in. plastic tubing for TK Series thermostats.
TOOL-090 Branch test adaptor with gauge for Johnson thermostats.
F-27383-1 © Copyright 2006 TAC. All Rights Reserved. 189
Tools