TAC Pneumatic Products Catalog
TAC Pneumatic Products Catalog
TAC Pneumatic Products Catalog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
T35-301, T36-301 (2212-318, 2212-319)<br />
Specifications (Continued)<br />
Construction<br />
Components Die cast aluminum, stainless steel, and glass-filled nylon.<br />
Diaphragms Fabric-reinforced neoprene.<br />
Air filter Internal.<br />
Supply air pressure Clean, dry, oil free air required (Refer to EN-123).<br />
Operating 20 psig (138 kPa).<br />
Maximum 30 psig (207 kPa).<br />
Connections For spring-reinforced 3/16 in. plastic tubing and required fittings (order separately).<br />
Air consumption<br />
Calibration point<br />
29.4 scim at 20 psig (8.0 mL/s at 172 kPa) main air pressure.<br />
Deadband output Factory set at 8 psig (adjustable).<br />
Direct acting T35-301 Heating: 4 psig (28 kPa) at setpoint. Cooling: 10.5 psig (72 kPa) at setpoint.<br />
Reverse acting T36-301 Cooling: 4 psig (28 kPa) at setpoint. Heating: 10.5 psig (72 kPa) at setpoint.<br />
Cover options See CT-x1, CTR-x1 for cover options (order separately).<br />
Setpoint adjustment Individual concealed adjustments or heating and cooling by means o N2-4 calibration tool.<br />
Mounting Upright position on wall.<br />
Dimensions 2-1/32 H x 2-1/32 W x 1-3/8 D in. (52 x 52 x 35 mm).<br />
For additional information, refer to Accessories page 636.<br />
Accessories<br />
Model No. Wholesale Model No. Description<br />
6-371 20-642 Mounting ring (use with mounting heads).<br />
10-15 20-695 Aspirating box, two pipe.<br />
10-53 20-707 Metal thermostat guard.<br />
10-57 20-710 Mortar joint fitting, two tube, copper.<br />
10-58 20-711 Mounting ring (use with N5-52).<br />
10-59 20-712 Internal stop kit.<br />
10-62 20-715 Thermostat guard, clear Lexan � .<br />
10-63 20-716 Insulating backplate, for plastic guards.<br />
10-64 � Tubing assembly with eyelets and fittings.<br />
10-66 21-468 Mortar joint fitting, two “FR” tubes.<br />
10-72 21-800 Concealed adjustment cover (black), for metal covers.<br />
10-73 21-473 Drywall mounting fitting (snap-in).<br />
10-76 21-876 Thermostat guard, opaque ABS.<br />
10-77 20-714 Adaptor plate.<br />
10-78 �� Insulating backplate.<br />
10-80 �� Concealed adjustment cover, for use with gray ABS cover.<br />
10-81 � Concealed adjustment cover, for use with beige ABS cover.<br />
10-82 20-850 Mounting plate for 2 x 4 switch box, Black.<br />
10-82-SS � Stainless steel.<br />
10-82-47 � Beige.<br />
10-82-48 � Euro-white.<br />
MCS-GA 22-138 Gauge tap adaptor.<br />
N2-4 20-881 Calibration tool for thermostats, (and P341, P541 and P541-RA).<br />
N5-49 21-065 Adaptor (for use with N5-53).<br />
N5-52 21-068 Bracket, drywall mount (use with 10-58 mounting ring).<br />
N5-53 21-069 Bracket, stud mount rough-in.<br />
N5-95 �� Wall thermostat conversion kit.<br />
�� 22-022 Thermostat conversion kit.<br />
�� 900-002 Thermostat calibration kit.<br />
See Thermostat Covers section starting on page page 25.<br />
For additional information, refer to Accessories page 157<br />
Typical Applications<br />
128<br />
M<br />
M B<br />
T35-301<br />
Thermostat<br />
V<br />
Heating<br />
Valve N.O.<br />
V<br />
Cooling<br />
Valve N.C.<br />
3 4<br />
3 Heating setpoint settings range from 2 to 6 psig,<br />
3 to 6 psig, or 3 to 7 psig.<br />
4 Cooling setpoint setting range is 8 to 13 psig.<br />
Figure 1 Typical Application.<br />
© Copyright 2006 <strong>TAC</strong>. All Rights Reserved. F-27383-1