ToneLab SE Owner's manual - Vox

E. DELAY EFFECTS
Here you can make settings for a delay effect inserted after the cabinet. You can
choose one of eleven types.
(*): This indicates a parameter that you can control from the expression pedal.
DELAY TIME FEEDBACK TONE DUCKING OPTION MIX
ECHO TIME FEEDBACK TONE LODAMP MIX
PLUS 26~2000[ms] 0.0~10.0 1.0~10.0 0.0~10.0 0.0~10.0
MULTI TIME FEEDBACK TONE MODE MIX
HEAD 1~2000[ms] 0.0~10.0 1.0~10.0 1,2,3,4,5 0.0~10.0
ANALOG TIME FEEDBACK TONE MIX
DELAY 1~2000[ms] 0.0~10.0 1.0~10.0 0.0~10.0
MOD TIME FEEDBACK TONE SPEED MIX
DELAY 3~2000[ms] 0.0~10.0 1.0~10.0 0.100~10.00[Hz] 0.0~10.0
SWEEP TIME FEEDBACK TONE SENS MIX
DELAY 26~2000[ms] 0.0~10.0 1.0~10.0 0.0~10.0 0.0~10.0
STEREO TIME FEEDBACK TONE DUCKING MIX
DELAY 1~4000[ms] 0.0~10.0 1.0~10.0 0.0~10.0 0.0~10.0
CROSS TIME FEEDBACK TONE DUCKING MIX
DELAY 1~4000[ms] 0.0~10.0 1.0~10.0 0.0~10.0 0.0~10.0
TAP 2 TIME FEEDBACK TONE DUCKING MIX
DELAY 1~4000[ms] 0.0~10.0 1.0~10.0 0.0~10.0 0.0~10.0
RHYTHM TIME FEEDBACK TONE DUCKING RHYTHM MIX
DELAY 1~4000[ms] 0.0~10.0 1.0~10.0 0.0~10.0 1,2,..11 0.0~10.0
HOLD TIME FEEDBACK TONE MIX
DELAY 1~8000[ms] 0.0~10.0 1.0~10.0 0.0~10.0
REVERSE TIME FEEDBACK TONE MIX
DELAY 26~4000[ms] 0.0~10.0 1.0~10.0 0.0~10.0
1. ECHO PLUS MONO IN/MONO OUT 1
This models one of the most respected analogue tape echo machines ever made.
In the original, the “echo” is produced by a playback head and the exact “delay
time” is set by varying the motor speed. Many professionals prefer these “lo-fi”
units because of the warm, dark echoes they produce.
[1] “TIME” 26–2000 [ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[5] “LODAMP” 0.0–10.0 * Adjusts the amount of low-frequency attenuation.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.
REVERB DELAY MODULATION PEDAL CABINET AMP TYPE Amp/Effect
TYPE
45