16.03.2015 Views

ToneLab SE Owner's manual - Vox

ToneLab SE Owner's manual - Vox

ToneLab SE Owner's manual - Vox

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

[1] “TIME” 26–2000 [ms] * Sets the delay time.<br />

[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.<br />

[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.<br />

[5] “<strong>SE</strong>NS” 0.0–10.0 * Adjusts the sensitivity at which the effect<br />

responds to the volume of your guitar.<br />

[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.<br />

6. STEREO DELAY (ST DL) STEREO IN/STEREO OUT 1<br />

This is Korg’s 24-bit digital delay, the DL8000R. With the exception of the sampling<br />

frequency and wave control of the DELAY TIME, the circuit is essentially identical.<br />

Since this is a full-stereo design, it’s particularly effective to place it after the output<br />

of a stereo MOD or REVERB effect.<br />

7. CROSS DELAY (CROSS DL) STEREO IN/STEREO OUT 3<br />

This is the DL8000R with settings to make the feedback cross over from L->R and<br />

R->L.<br />

8. 2TAP DELAY (2TAP DLY) MONO IN/STEREO OUT 1<br />

This is the DL8000R with two delay taps whose DELAY TIME is skewed by 20 ms<br />

and separately assigned to L and R, turning a mono input into stereo.<br />

[1] “TIME” 1–4000 [ms] Sets the delay time.<br />

[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.<br />

[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.<br />

[4] “DUCKING” 0.0–10.0 * Adjusts the sensitivity at which the effect will<br />

“duck” (decrease) in response to the volume of<br />

your guitar.<br />

Ducking: This automatically lowers the volume of<br />

the delay sound when you play your guitar loudly,<br />

allowing your playing to come through.<br />

[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.<br />

9. RHYTHM DELAY (RHYTM DL) MONO IN/MONO OUT 1<br />

This provides a DL8000R function in which the TIME of two delay taps is automatically<br />

set according to the RHYTHM you specify.<br />

[1] “TIME” 1–4000 [ms] Sets the delay time.<br />

[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.<br />

[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.<br />

[4] “DUCKING” 0.0–10.0 * Adjusts the sensitivity at which the effect will<br />

“duck” (decrease) in response to the volume of<br />

your guitar.<br />

[5] “RHYTHM” 1, 2, ...11 Specifies the two-tap rhythm delay when the<br />

delay time is set to quarter-note timing. For some<br />

settings, only one tap is used.<br />

[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.<br />

REVERB DELAY MODULATION PEDAL CABINET AMP TYPE Amp/Effect<br />

TYPE<br />

47

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!