ToneLab SE Owner's manual - Vox

10. HOLD DELAY (HOLD DLY) MONO IN/MONO OUT 1
If you assign “HOLD DLY” to the CONTROL pedal, you’ll be able to hold the delay
sound.
[1] “TIME” 1–8000 [ms] Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.
CONTROL pedal: HOLD DLY: If you select “HOLD DLY” for the CONTROL
pedal, the delay sound will be held from the
moment you turn the pedal on.
11. REVERSE DELAY (REVRS DL) MONO IN/MONO OUT 1
This is a digital delay that plays the delay sound backward. You can get some
really cool results by playing long notes in a legato fashion.
[1] “TIME” 1–4000 [ms] Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[6] “MIX” 0.0–10.0 * Adjusts the mix balance between the delay
sound and direct sound. With a setting of 10 you
will hear only the delay sound.
F. REVERB EFFECTS
Here you can make settings for the reverb effect that is placed after the cabinet.
You can choose one of eleven types of reverb.
(*): This indicates a parameter that you can control from an expression pedal.
REVERB
TIME
LO
DAMP
HI
DAMP
PRE
DELAY
SHAPE
MIX
SPRING 1
SPRING 2
PLATE 1
PLATE 2
CHAMBER 1
CHAMBER 2
ROOM 1
ROOM 2
HALL 1
HALL 2
GATE
TIME LODAMP HIDAMP PREDELAY MIX
1.0~10.0 0.0~10.0 0.0~10.0 0~100[ms] 0.0~10.0
TIME LODAMP HIDAMP PREDELAY SHAPE MIX
5~500[ms] 0.0~10.0 0.0~10.0 0~100[ms] 1,2 0.0~10.0
1. SPRING 1 MONO IN/STEREO OUT 1
A model of the spring reverb system used in guitar amps – ideal for surf music!
48