ToneLab SE Owner's manual - Vox
ToneLab SE Owner's manual - Vox
ToneLab SE Owner's manual - Vox
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NOTE: Nothing will be controlled if the target effect is “OFF.”<br />
The expression pedal target is indicated as follows.<br />
“*/###### *: Target category, ######: Target parameter<br />
• Examples<br />
“--OFF--” --- OFF (control nothing)<br />
“VOLUME” --- Volume pedal<br />
“P/DIRECT” --- (*: P (pedal)) DIRECT (mix amount of original sound)<br />
for a pedal effect (e.g., OCTAVE)<br />
“M/SPEED” --- (*: M (modulation)) SPEED of a modulation effect<br />
“D/INPUT” --- (*: D (delay)) Input level of a delay effect<br />
“R/MIX” --- (*: R (reverb)) MIX (mix amount of reverb sound) of a<br />
reverb effect<br />
“A/VRGN A” --- (*: A (amp)) [VR GAIN] (channel A) of an amp model<br />
In addition to the examples we’ve shown here, a wide variety of expression targets<br />
provided for each effect model can be freely assigned to the two expression<br />
pedals.<br />
If desired, you can make more detailed settings.<br />
NOTE: For “--OFF--”, “VOLUME”, “M/PITCH”, “D/INPUT”, and “R/INPUT”, operating<br />
the expression pedal does not edit the parameter.<br />
5. Turn value knob 2 to make the name display read “EXP 1 MIN.” Here you can<br />
specify the PITCH value for when the pedal is at the minimum position. Use<br />
value knob 2 or the ▲, ▼ buttons to adjust the setting.<br />
6. Turn value knob 3 to make the name display read “EXP 1 MAX.” Here you can<br />
specify the PITCH value for when the pedal is at the maximum position. Use<br />
value knob 3 or the ▲, ▼ buttons to adjust the setting.<br />
When you operate the expression pedal, the target parameter will change<br />
within the range you specified here.<br />
In the same way, you can use value knobs 4–6 or the ▲, ▼, √, ® buttons to<br />
make expression target parameter settings for expression pedal 2. (When you<br />
are making EXP2 expression target settings, the value display indicates “E2.”)<br />
NOTE: When you change the expression target, the MIN and MAX values will be<br />
initialized.<br />
7. Press the EXIT switch to return to the mode you were in.<br />
NOTE: The changes you make will not be preserved in internal memory unless you<br />
store the program.<br />
EXPRESSION PEDAL CONTROL INITIALIZATION <strong>SE</strong>TTINGS<br />
“EXP1INIT” Expression pedal 1 initialization setting<br />
“EXP2INIT” Expression pedal 2 initialization setting<br />
If you press the ® button several times while the EXPRESSION button is<br />
blinking, the “EXP1INIT” setting screen will appear.<br />
If you then press the ® button again, the “EXP2INIT” setting screen will appear.<br />
Tuner<br />
Pedals<br />
MIDI/DIGITAL<br />
Factory<br />
settings<br />
Troubleshooting<br />
Spec.<br />
Program<br />
List<br />
55